Re: [PATCH V5 1/2] arm64: dts: freescale: imx8qxp: add cpu opp table

[Viresh Kumar]

On 14-02-19, 08:02, Anson Huang wrote:
> Add i.MX8QXP CPU opp table to support cpufreq.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
> Changes since V4:
> 	- remove redundant clock-latency property in A35_0;
> 	- add #cooling-cells for all A35 core.
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 4021f25..fad1259 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -34,6 +34,9 @@
>  			reg = <0x0 0x0>;
>  			enable-method = "psci";
>  			next-level-cache = <&A35_L2>;
> +			clocks = <&clk IMX_A35_CLK>;

As I said in my previous email, mentioning clocks is important too for
other CPUs.

> +			operating-points-v2 = <&a35_0_opp_table>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		A35_1: cpu@1 {
> @@ -42,6 +45,8 @@
>  			reg = <0x0 0x1>;
>  			enable-method = "psci";
>  			next-level-cache = <&A35_L2>;
> +			operating-points-v2 = <&a35_0_opp_table>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		A35_2: cpu@2 {
> @@ -50,6 +55,8 @@
>  			reg = <0x0 0x2>;
>  			enable-method = "psci";
>  			next-level-cache = <&A35_L2>;
> +			operating-points-v2 = <&a35_0_opp_table>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		A35_3: cpu@3 {
> @@ -58,6 +65,8 @@
>  			reg = <0x0 0x3>;
>  			enable-method = "psci";
>  			next-level-cache = <&A35_L2>;
> +			operating-points-v2 = <&a35_0_opp_table>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		A35_L2: l2-cache0 {
> @@ -65,6 +74,24 @@
>  		};
>  	};
>  
> +	a35_0_opp_table: opp-table {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-900000000 {
> +			opp-hz = /bits/ 64 <900000000>;
> +			opp-microvolt = <1000000>;
> +			clock-latency-ns = <150000>;
> +		};
> +
> +		opp-1200000000 {
> +			opp-hz = /bits/ 64 <1200000000>;
> +			opp-microvolt = <1100000>;
> +			clock-latency-ns = <150000>;
> +			opp-suspend;
> +		};
> +	};
> +
>  	gic: interrupt-controller@51a00000 {
>  		compatible = "arm,gic-v3";
>  		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
> -- 
> 2.7.4

-- 
viresh