Re: [PATCH v1 2/2] PCI/ASPM: Save LTR Capability for suspend/resume

[Bjorn Helgaas]

On Wed, Feb 13, 2019 at 10:53:01AM +0530, Vidya Sagar wrote:
> On 2/12/2019 4:25 AM, Bjorn Helgaas wrote:
> > From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > 
> > Latency Tolerance Reporting (LTR) allows Endpoints and Switch Upstream
> > Ports to report their latency requirements to upstream components.  If ASPM
> > L1 PM substates are enabled, the LTR information helps determine when a
> > Link enters L1.2 [1].
> > 
> > Software must set the maximum latency values in the LTR Capability based on
> > characteristics of the platform, then set LTR Mechanism Enable in the
> > Device Control 2 register in the PCIe Capability.  The device can then use
> > LTR to report its latency tolerance.
> > 
> > If the device reports a maximum latency value of zero, that means the
> > device requires the highest possible performance and the ASPM L1.2 substate
> > is effectively disabled.
> > 
> > We put devices in D3 for suspend, and we assume their internal state is
> > lost.  On resume, previously we did not restore the LTR Capability, but we
> > did restore the LTR Mechanism Enable bit, so devices would request the
> > highest possible performance and ASPM L1.2 wouldn't be used.
> > 
> > [1] PCIe r4.0, sec 5.5.1
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=201469
> > Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > ---
> >   drivers/pci/pci.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++++++--
> >   1 file changed, 51 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index c9d8e3c837de..13d65991c77b 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -1233,7 +1233,6 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
> >   	pcie_capability_write_word(dev, PCI_EXP_SLTCTL2, cap[i++]);
> >   }
> > -
> >   static int pci_save_pcix_state(struct pci_dev *dev)
> >   {
> >   	int pos;
> > @@ -1270,6 +1269,45 @@ static void pci_restore_pcix_state(struct pci_dev *dev)
> >   	pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
> >   }
> > +static void pci_save_ltr_state(struct pci_dev *dev)
> > +{
> > +	int ltr;
> > +	struct pci_cap_saved_state *save_state;
> > +	u16 *cap;
> > +
> > +	if (!pci_is_pcie(dev))
> > +		return;
> > +
> > +	ltr = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
> > +	if (!ltr)
> > +		return;
> > +
> > +	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_LTR);
> > +	if (!save_state) {
> > +		pci_err(dev, "no suspend buffer for LTR; ASPM issues possible after resume\n");
> > +		return;
> > +	}
> > +
> > +	cap = (u16 *)&save_state->cap.data[0];
> > +	pci_read_config_word(dev, ltr + PCI_LTR_MAX_SNOOP_LAT, cap++);
> > +	pci_read_config_word(dev, ltr + PCI_LTR_MAX_NOSNOOP_LAT, cap++);
> > +}
> > +
> > +static void pci_restore_ltr_state(struct pci_dev *dev)
> > +{
> > +	struct pci_cap_saved_state *save_state;
> > +	int ltr;
> > +	u16 *cap;
> > +
> > +	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_LTR);
> > +	ltr = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
> > +	if (!save_state || !ltr)
> > +		return;
> > +
> > +	cap = (u16 *)&save_state->cap.data[0];
> > +	pci_write_config_word(dev, ltr + PCI_LTR_MAX_SNOOP_LAT, *cap++);
> > +	pci_write_config_word(dev, ltr + PCI_LTR_MAX_NOSNOOP_LAT, *cap++);
> > +}
> >   /**
> >    * pci_save_state - save the PCI configuration space of a device before suspending
> > @@ -1291,6 +1329,7 @@ int pci_save_state(struct pci_dev *dev)
> >   	if (i != 0)
> >   		return i;
> > +	pci_save_ltr_state(dev);
> >   	pci_save_dpc_state(dev);
> >   	return pci_save_vc_state(dev);
> >   }
> > @@ -1390,7 +1429,12 @@ void pci_restore_state(struct pci_dev *dev)
> >   	if (!dev->state_saved)
> >   		return;
> > -	/* PCI Express register must be restored first */
> > +	/*
> > +	 * Restore max latencies (in the LTR capability) before enabling
> > +	 * LTR itself (in the PCIe capability).
> > +	 */
> > +	pci_restore_ltr_state(dev);
> > +
> >   	pci_restore_pcie_state(dev);
> >   	pci_restore_pasid_state(dev);
> >   	pci_restore_pri_state(dev);
> > @@ -2998,6 +3042,11 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev)
> >   	if (error)
> >   		pci_err(dev, "unable to preallocate PCI-X save buffer\n");
> > +	error = pci_add_ext_cap_save_buffer(dev, PCI_EXT_CAP_ID_LTR,
> > +					    2 * sizeof(u16));
> > +	if (error)
> > +		pci_err(dev, "unable to allocate suspend buffer for LTR\n");
> > +
> >   	pci_allocate_vc_save_buffers(dev);
> >   }

> Don't we have to save and restore L1SS control registers (PCI_L1SS_CTL1 &
> PCI_L1SS_CTL2) as well?

I think you're right!  It's getting embarrassing how much stuff we
missed.  I'll work on this, and look for other capabilities where we
might be missing save/restore.

Bjorn