[PATCH] tlv320aic32x4: delay i2c access by 1 ms after hardware reset

[Peter Seiderer]

As stated in 'TLV320AIC3254 Application Reference Guide' ([1]):

  3.2 Device Startup Lockout Times
    After the TLV320AIC3254 initializes through hardware reset at power-up
    or software reset, the internal registers initialize to default values.
    This initialization takes place within 1ms after pulling the RESET
    signal high. During this initialization phase, no register-read or
    register-write operation should be performed on ADC or DAC coefficient
    buffers. Also, no block within the codec should be powered up during
    the initialization phase.

[1] http://www.ti.com/lit/an/slaa408a/slaa408a.pdf

Signed-off-by: Peter Seiderer <ps.report@xxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 sound/soc/codecs/tlv320aic32x4.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index e1bfba62fc08..96f1526cb258 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -970,6 +970,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
 	if (gpio_is_valid(aic32x4->rstn_gpio)) {
 		ndelay(10);
 		gpio_set_value(aic32x4->rstn_gpio, 1);
+		mdelay(1);
 	}
 
 	snd_soc_component_write(component, AIC32X4_RESET, 0x01);
-- 
2.20.1