Re: [PATCH] arm64: dts: meson-gxbb-odroidc2: enable I2C bus B

[Neil Armstrong]

Hi,

Le 09/02/2019 16:50, Stijn Tintel a écrit :
> The ODROID C2 has 2 I2C buses, so enable both of them.

Thanks for the change, but this I2C bus is on the 40-pin header,
until we have a way to add support for HATs/CAPEs/<whatever hooks on the header>
upstream, we prefer not enabling any functions on these pins by default.

You can, if you want add support for most functions, but "disabled" with a
proper description of pins used by these functions.

You can also maintain a set of overlay files like it's done for the
libretech-cc boards https://github.com/libre-computer-project/libretech-overlays/tree/for-4.13.y/overlays
and use them with the Armbian mainline based latest image for example.

Neil

> 
> Signed-off-by: Stijn Tintel <stijn@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> index 1cc9dc68ef00..ee666471a580 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
> @@ -180,6 +180,12 @@
>  	pinctrl-names = "default";
>  };
>  
> +&i2c_B {
> +	status = "okay";
> +	pinctrl-0 = <&i2c_b_pins>;
> +	pinctrl-names = "default";
> +};
> +
>  &ir {
>  	status = "okay";
>  	pinctrl-0 = <&remote_input_ao_pins>;
>