Re: sdhci-esdhc-imx/v5.0-rc5: i.MX50 system hangs when "per" clock is disabled

[Fabio Estevam]

On Sat, Feb 9, 2019 at 2:25 PM Jonathan NeuschÃfer
<j.neuschaefer@xxxxxxx> wrote:
>
> On Thu, Feb 07, 2019 at 10:50:28PM -0200, Fabio Estevam wrote:
> > On Thu, Feb 7, 2019 at 8:52 PM Jonathan NeuschÃfer
> [...]
> > > I tried to compare the CCM's clocks between i.MX50 and i.MX53, but
> > > unfortunately, the i.MX50 reference manual doesn't have the table called
> > > "Output clocks from CCM".
> >
> > Please check Table 5-10. CCM_CCGR3 Gated Clock Mapping to Target
> > Module from the MX50 Referene Manual.
>
> Ok, the tables show:
>
> For i.MX50:
> [1:0] 0 ipg_clk_root    eSDHCv2_1

and it also shows that ahb_clk_root is controlled by these same bits.

That's why I added the ahb entry in my suggestion.

> [3:2] 1 esdhc1_clk_root eSDHCv2_1
>
> For i.MX53:
> 1â0 CG0 esdhc1_ipg_hclk: affects ipg_clk and hclk inputs of ESDEHC-1 (esdhc1_clk_enable)
> 3â2 CG1 esdhc1_perclk:   affects ipg_clk_perclk   input  of ESDEHC-1 (esdhc1_serial_clk_enable)
>
> Table 18-3 (Output clocks from CCM) in the iMX53RM shows that
> ESDHCv2-1's ipg_clk_perclk is esdhc1_clk_root, so the clock structure
> does seem to be the same here, between i.MX50 and i.MX53â

That's correct. The esdhc clocks seem to differ.