Re: [PATCHv3 14/27] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number

[Subrahmanya Lingappa]

On Tue, Jan 29, 2019 at 1:40 PM Z.q. Hou <zhiqiang.hou@xxxxxxx> wrote:
>
> From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
>
> The reset value is all zero, so set a workable value for Primary,
> Secondary and Subordinate bus numbers.
>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> Reviewed-by: Minghuan Lian <Minghuan.Lian@xxxxxxx>
> ---
> V3:
>  - No change
>
>  drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
> index db7ecb021c63..9210165fe8c0 100644
> --- a/drivers/pci/controller/pcie-mobiveil.c
> +++ b/drivers/pci/controller/pcie-mobiveil.c
> @@ -582,6 +582,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
>         u32 value, pab_ctrl, type;
>         struct resource_entry *win;
>
> +       /* setup bus numbers */
> +       value = csr_readl(pcie, PCI_PRIMARY_BUS);
> +       value &= 0xff000000;
> +       value |= 0x00ff0100;
> +       csr_writel(pcie, value, PCI_PRIMARY_BUS);
> +
>         /*
>          * program Bus Master Enable Bit in Command Register in PAB Config
>          * Space
> --
> 2.17.1
>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>