[PATCH v6 1/3] dt-bindings: soc: Add ZynqMP PM bindings

From: Jolly Shah
Date: Tue Jan 29 2019 - 15:40:39 EST


From: Rajan Vaja <rajan.vaja@xxxxxxxxxx>

Add documentation to describe Xilinx ZynqMP power management
bindings.

Signed-off-by: Rajan Vaja <rajan.vaja@xxxxxxxxxx>
Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/power/reset/xlnx,zynqmp-power.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt

diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..d366f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt
@@ -0,0 +1,25 @@
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible: Must contain: "xlnx,zynqmp-power"
+ - interrupts: Interrupt specifier
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+};
--
2.7.4