[PATCH AUTOSEL 4.20 131/304] arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios

From: Sasha Levin
Date: Mon Jan 28 2019 - 12:43:29 EST


From: Oskari Lemmela <oskari@xxxxxxxxxxx>

[ Upstream commit 690e16bada6029694740d5501025faf483d14339 ]

Rockpro64 is not able boot if GPIO1_C1 pin is pulled high
before loading linux kernel.

In rockpro64 GPIO1_C1 pin is connected vdd_cpu_b regulator
VSEL pin. Pin should be pulled down in normal operation and
pulled high in suspend.

PMIC LDO_REG2 is connected to touch panel connector.
Rename regulator and set it to correct voltage.

PCIe power is controller by GPIO1_D0.

Schematics can be downloaded from:
http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf

Signed-off-by: Oskari Lemmela <oskari@xxxxxxxxxxx>
Acked-by: Akash Gajjar <Akash_Gajjar@xxxxxxxxxx>
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../boot/dts/rockchip/rk3399-rockpro64.dts | 20 +++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 1d35f5406b5e..5bd4d69914bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -97,7 +97,7 @@
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pwr_en>;
regulator-name = "vcc3v3_pcie";
@@ -293,12 +293,12 @@
};
};

- vcc2v8_dvp: LDO_REG2 {
- regulator-name = "vcc2v8_dvp";
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
@@ -397,7 +397,9 @@
vdd_cpu_b: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
- fcs,suspend-voltage-selector = <0>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -415,6 +417,8 @@
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -519,7 +523,7 @@

pcie {
pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};

@@ -529,7 +533,7 @@
};

vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};

vsel2_gpio: vsel2-gpio {
--
2.19.1