Re: [PATCH] iio: adc: ad7476: Add support for ADS786X ADCs

From: Ricardo Ribalda Delgado
Date: Fri Jan 25 2019 - 04:58:17 EST


Hi Alexandru

On Fri, Jan 25, 2019 at 9:29 AM Alexandru Ardelean
<ardeleanalex@xxxxxxxxx> wrote:
>
> On Thu, Jan 24, 2019 at 11:33 PM Ricardo Ribalda Delgado
> <ricardo@xxxxxxxxxxx> wrote:
> >
> > Add support for ADS7866, ADS7867 and ADS7868 8/10/12 bit Single channel
> > ADC.
> >
> > Datasheet: http://www.ti.com/product/ADS7866
> > Datasheet: http://www.ti.com/product/ADS7867
> > Datasheet: http://www.ti.com/product/ADS7868
> >
> > Signed-off-by: Ricardo Ribalda Delgado <ricardo@xxxxxxxxxxx>
> > ---
> > drivers/iio/adc/Kconfig | 3 ++-
> > drivers/iio/adc/ad7476.c | 20 ++++++++++++++++++++
> > 2 files changed, 22 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index f9354e5ee65c..d86900fc2634 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -64,7 +64,8 @@ config AD7476
> > help
> > Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
> > AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
> > - AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
> > + AD7495, AD7910, AD7920, AD7920, ADS7866, ADS7867, ADS7868 SPI analog
> > + to digital converters (ADC).
>
> The driver is for Analog Devices parts.
> And these new parts are from TI.
>
> I'm not sure what the policy is for mixing manufacturers in drivers.
> But if that is allowed/fine, then maybe it would be a good idea to
> highlight that these chips are from another manufacturer.
> Or maybe rename the driver to a generic form to support both manufacturers ?
>
> In any case, Jonathan will have to tell us what to do here :)

Thanks for your review.

I have to send a v2, because I have inverted the name of the devices :S.

I will send it right away to avoid that anyone uses this version and
then wait for Jonathan feedback

>
> Thanks
> Alex
>
> >
> > To compile this driver as a module, choose M here: the
> > module will be called ad7476.
> > diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
> > index 0549686b9ef8..108c18d64f7d 100644
> > --- a/drivers/iio/adc/ad7476.c
> > +++ b/drivers/iio/adc/ad7476.c
> > @@ -59,6 +59,9 @@ enum ad7476_supported_device_ids {
> > ID_ADC081S,
> > ID_ADC101S,
> > ID_ADC121S,
> > + ID_ADS7866,
> > + ID_ADS7867,
> > + ID_ADS7868,
> > };
> >
> > static irqreturn_t ad7476_trigger_handler(int irq, void *p)
> > @@ -157,6 +160,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
> > #define AD7940_CHAN(bits) _AD7476_CHAN((bits), 15 - (bits), \
> > BIT(IIO_CHAN_INFO_RAW))
> > #define AD7091R_CHAN(bits) _AD7476_CHAN((bits), 16 - (bits), 0)
> > +#define ADS786X_CHAN(bits) _AD7476_CHAN((bits) + 4, 0, \
> > + BIT(IIO_CHAN_INFO_RAW))
> >
> > static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
> > [ID_AD7091R] = {
> > @@ -209,6 +214,18 @@ static const struct ad7476_chip_info ad7476_chip_info_tbl[] = {
> > .channel[0] = ADC081S_CHAN(12),
> > .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
> > },
> > + [ID_ADS7866] = {
> > + .channel[0] = ADS786X_CHAN(8),
> > + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
> > + },
> > + [ID_ADS7867] = {
> > + .channel[0] = ADS786X_CHAN(10),
> > + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
> > + },
> > + [ID_ADS7868] = {
> > + .channel[0] = ADS786X_CHAN(12),
> > + .channel[1] = IIO_CHAN_SOFT_TIMESTAMP(1),
> > + },
> > };
> >
> > static const struct iio_info ad7476_info = {
> > @@ -314,6 +331,9 @@ static const struct spi_device_id ad7476_id[] = {
> > {"adc081s", ID_ADC081S},
> > {"adc101s", ID_ADC101S},
> > {"adc121s", ID_ADC121S},
> > + {"ads7866", ID_ADS7866},
> > + {"ads7867", ID_ADS7867},
> > + {"ads7868", ID_ADS7868},
> > {}
> > };
> > MODULE_DEVICE_TABLE(spi, ad7476_id);
> > --
> > 2.20.1
> >



--
Ricardo Ribalda
http://ribalda.com