Re: [PATCH 1/2] ARM: dts: meson8b: odroidc1: Enable usb phy node

[Anand Moon]

Hi Kevin,
On Wed, 23 Jan 2019 at 22:20, Kevin Hilman <khilman@xxxxxxxxxxxx> wrote:
>
> Anand Moon <linux.amoon@xxxxxxxxx> writes:
>
> > Add missing vbus-supply link to phy controller for usb_phy0
> > and usb_phy1 nodes, this changes fixed the power issue
> > on usb ports usb, changes help fix usb reset warning.
> >
> > [  821.991470] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [  825.243385] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [  828.151310] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> > [  830.991241] usb 1-1.2: reset high-speed USB device number 3 using dwc2
> >
> > Fixes: 2eb79a4d15ff (ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board)
> > Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> > Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> > Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> > ---
> > Rebased on Kevin's amlogic/v5.0/fixes branch
>
> As requested, dropping this series from the fixes branch pending further
> debug and testing.
>
> Kevin

[snip]

Thanks your very much.

Best Regards
-Anand