[PATCH v3 0/5] Add Oxalis board support

[Manivannan Sadhasivam]

Hello,

This patchset adds Oxalis board support. This board is one of the
96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some
of the key features of this board:

* SoC: NXP Layerscape LS1012A
* RAM: 1GB DDR3L
* PMU: NXP VR5100
* Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA
* Connectivity: 2x Ethernet
* USB: 2x USB3.0

More information about this board can be found in 96Boards product
page: https://www.96boards.org/product/oxalis/

Ethernet and SPI flash are not supported yet!

Thanks,
Mani

Changes in v3:

* Fixed LS1012A and LS1021A bindings
* Added missing devicetree compatibles for LS1021A based boards
* Added Rob's Reviewed-by tag for Vendor prefix patch

Changes in v2:

As per Rob's review:

* Adopted the Oxalis board binding to JSON format.
* Sorted the EBS-SYSTART vendor prefix alphabetically.
* Used the generic node name for audio codec.

Manivannan Sadhasivam (5):
  dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based
    boards
  ARM: dts: Add devicetree compatibles for LS1021A based boards
  dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
  dt-bindings: arm: fsl: Add devicetree binding for Oxalis
  arm64: dts: freescale: Add devicetree for Oxalis

 .../devicetree/bindings/arm/fsl.yaml          | 11 ++-
 .../devicetree/bindings/vendor-prefixes.txt   |  1 +
 arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts   |  1 +
 arch/arm/boot/dts/ls1021a-qds.dts             |  1 +
 arch/arm/boot/dts/ls1021a-twr.dts             |  1 +
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++
 7 files changed, 111 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts

-- 
2.17.1