On Mon, 14 Jan 2019 15:17:10 -0500Ok Thanks Jonathan!
sebastien bourdelin <sebastien.bourdelin@xxxxxxxxx> wrote:
On 1/12/19 1:28 PM, Jonathan Cameron wrote:Given we aren't planning to do more than turn them on and that'll work
On Fri, 11 Jan 2019 15:53:59 -0500If that's fine with you, i prefer to leave it as it is right now as i
Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx> wrote:
BME680 is a pressure/temperature/humidity/voc sensor.Hmm. We could add the VDD and VDIO regulators perhaps.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@xxxxxxxxx>
Driver assumes they are on currently but we'll get a board where control
is needed sooner or later. I'm not that fussed about this though.
don't feel
confident enough to correctly explain it in the Documentation.
But if you have more input, you are more then welcome!
fine with stub regulators (so they can effectively be optional for ever),
there is no particular need to put them in now if you prefer not to.
Jonathan
Jonathan
---
.../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
new file mode 100644
index 000000000000..885a1b918340
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
@@ -0,0 +1,11 @@
+Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
+
+Required properties:
+- compatible: must be "bosch,bme680"
+
+Example:
+
+bme680@77 {
+ compatible = "bosch,bme680";
+ reg = <0x77>;
+};