Re: [PATCH v3 4/6] dt-binding: pcf85063: add xtal load capacitance

[Rob Herring]

On Sat, 19 Jan 2019 10:00:29 +0100, Sam Ravnborg wrote:
> The NXP pcf85063 supports two different xtal load capacitance
> - 7000fF  (7pF)    HW default, Linux driver default
> - 12500fF (12.5pF) Minimum power consumption
> 
> To obtain a precise RTC the pcf85063 must be configured
> with the correct capacitance load of the xtal.
> 
> Add a property to specify the xtal capacitance load.
> The default value matches that of the current Linux driver.
> 
> With a dedicated binding remove the entry in rtc.txt
> 
> Signed-off-by: Søren Andersen <san@xxxxxxx>
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
> Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Urs Fässler <urs.fassler@xxxxxx>
> ---
>  Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt | 18 ++++++++++++++++++
>  Documentation/devicetree/bindings/rtc/rtc.txt          |  1 -
>  2 files changed, 18 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>