[PATCH 2/6] dt-bindings: display: armada: Improve the LCDC documentation

[Lubomir Rintel]

The port is a child, not a property. And it deserves an example.

Also, make the title a bit more visually distinguishable -- this will
look better when the documentation of other Adrmada DRM nodes will be
present.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
 .../display/armada/marvell-armada-drm.txt        | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt b/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt
index 46525ea3e646..2606a8efc956 100644
--- a/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt
+++ b/Documentation/devicetree/bindings/display/armada/marvell-armada-drm.txt
@@ -1,10 +1,11 @@
-Device Tree bindings for Armada DRM CRTC driver
+Marvell Armada LCD controller
+=============================
 
 Required properties:
+
  - compatible: value should be "marvell,dove-lcd".
  - reg: base address and size of the LCD controller
  - interrupts: single interrupt number for the LCD controller
- - port: video output port with endpoints, as described by graph.txt
 
 Optional properties:
 
@@ -19,6 +20,11 @@ Note: all clocks are optional but at least one must be specified.
 Further clocks may be added in the future according to requirements of
 different SoCs.
 
+Required child nodes:
+
+- port: video output port with endpoints, as described by
+  Documentation/devicetree/bindings/graph.txt
+
 Example:
 
 	lcd0: lcd-controller@820000 {
@@ -27,4 +33,10 @@ Example:
 		interrupts = <47>;
 		clocks = <&si5351 0>;
 		clock-names = "ext_ref_clk_1";
+
+		lcd0_port: port {
+			lcd0_rgb_out: endpoint {
+				remote-endpoint = <&encoder_rgb_in>;
+			};
+		};
 	};
-- 
2.20.1