Re: [PATCH v6 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings

[Marek Vasut]

On 1/18/19 9:03 AM, Geert Uytterhoeven wrote:
> Hi Mason,
> 
> On Fri, Jan 18, 2019 at 6:55 AM Mason Yang <masonccyang@xxxxxxxxxxx> wrote:
>> Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller.
>>
>> Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> 
> Thanks for the update!
> 
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
>> @@ -0,0 +1,37 @@
>> +Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
>> +----------------------------------------------------------
>> +
>> +Required properties:
>> +- compatible: should be
> 
>     compatible: should be an SoC-specific compatible value, followed by
>     "renesas,rcar-gen3-rpc" as a fallback.
> 
>     Examples of the latter are:
>       - "renesas,r8a7795-rpc" (R-Car H3).
> 
> This makes it future-proof, in case the RPC on a specific SoC version needs
> to be handled specially. We already know that is the case for R-Car V3M.
> 
>> +- #address-cells: should be 1
>> +- #size-cells: should be 0
>> +- reg: should contain three register areas:
>> +       first for the base address of rpc-if registers,
>> +       second for the direct mapping read mode and
>> +       third for the write buffer area.
>> +- reg-names: should contain "regs", "dirmap" and "wbuf"
>> +- clock-names: should contain "rpc"
>> +- clocks: should contain 1 entries for the module's clock
>> +
>> +Example:
>> +
>> +       rpc: rpc@ee200000 {
>> +               compatible = "renesas,rcar-gen3-rpc";
> 
> compatible = "renesas,r8a7795-rpc," renesas,rcar-gen3-rpc";

Without the extra comma after r8a7795-rpc, of course ;-)

-- 
Best regards,
Marek Vasut