[PATCH v10 0/3] add uart DMA function

[Long Cheng]

In Mediatek SOCs, the uart can support DMA function.
Base on DMA engine formwork, we add the DMA code to support uart. And put the code under drivers/dma/mediatek.

This series contains document bindings, Kconfig to control the function enable or not,
device tree including interrupt and dma device node, the code of UART DMA

Changes compared to v9
-rename dt-bindings file
-remove direction from device_config
-simplified code
Changes compared to v8
-revise missing items
Changes compared to v7:
-modify apdma uart tx
Changes compared to v6:
-Correct spelling
Changes compared to v5:
-move 'requst irqs' to alloc channel
-remove tasklet.
Changes compared to v4:
-modify Kconfig depends on.
Changes compared to v3:
-fix CONFIG_PM, will cause build fail
Changes compared to v2:
-remove unimportant parameters
-instead of cookie, use APIs of virtual channel.
-use of_dma_xlate_by_chan_id.
Changes compared to v1:
-mian revised file, 8250_mtk_dma.c
--parameters renamed for standard
--remove atomic operation

Long Cheng (3):
  dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
  arm: dts: mt2712: add uart APDMA to device tree
  dt-bindings: dma: uart: rename binding

 .../devicetree/bindings/dma/8250_mtk_dma.txt       |   33 -
 .../devicetree/bindings/dma/mtk-uart-apdma.txt     |   33 +
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi          |   51 ++
 drivers/dma/mediatek/Kconfig                       |   11 +
 drivers/dma/mediatek/Makefile                      |    1 +
 drivers/dma/mediatek/mtk-uart-apdma.c              |  669 ++++++++++++++++++++
 6 files changed, 765 insertions(+), 33 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
 create mode 100644 drivers/dma/mediatek/mtk-uart-apdma.c

-- 
1.7.9.5