Re: [PATCH] arm64: dts: meson: fix g12a buses

[Martin Blumenstingl]

Hi Jerome,

On Wed, Jan 16, 2019 at 5:52 PM Jerome Brunet <jbrunet@xxxxxxxxxxxx> wrote:
[...]
> -               aobus: bus@ff800000 {
> -                       compatible = "simple-bus";
> -                       reg = <0x0 0xff800000 0x0 0x100000>;
are you sure about removing aobus?
in your patch "arm64: dts: meson: g12a: add pinctrl support
controllers" from [0] you're adding back an "rti" bus at the same
memory address, except that it's size is 0x1000 instead of 0x100000

I don't have any G12A datasheet so it's hard for me to ACK / NACK this
patch, here are some clues why I'm asking:
- GXM's public datasheet lists the "RTI" region at 0xC8100000 -
0xC81FFFFF, we call it "aobus" in our .dtsi
- buildroot_openlinux_kernel_4.9_fbdev_20180706/kernel/aml-4.9/arch/arm64/boot/dts/amlogic/mesong12a.dtsi
also uses an aobus node as well as an io_aobus_base sub-node for the
codec_io node (the latter is obviously not upstream)


Regards
Martin


[0] https://lore.kernel.org/patchwork/patch/1032981/