Re: [linux-sunxi] [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed

From: Priit Laes
Date: Thu Jan 17 2019 - 02:24:10 EST

Next message: YueHaibing: "[PATCH -next] perf: remove duplicated include from perf_event.h"
Previous message: YueHaibing: "[PATCH net-next] qed: remove duplicated include from qed_if.h"
In reply to: Jernej Åkrabec: "Re: [linux-sunxi] [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed"
Next in thread: Jernej Åkrabec: "Re: [linux-sunxi] [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Jan 16, 2019 at 06:00:32PM +0100, Jernej Åkrabec wrote:
> Dne sreda, 16. januar 2019 ob 13:09:58 CET je Priit Laes napisal(a):
> > On Thu, Jan 10, 2019 at 06:10:59PM +0100, Jernej Åkrabec wrote:
> > > Dne Äetrtek, 10. januar 2019 ob 10:15:48 CET je Priit Laes napisal(a):
> > > > On Sun, Nov 04, 2018 at 07:26:39PM +0100, Jernej Skrabec wrote:
> > > > > Currently MP clocks don't consider adjusting parent rate even if they
> > > > > are allowed to do so. Such behaviour considerably lowers amount of
> > > > > possible rates, which is very inconvenient when such clock is used for
> > > > > pixel clock, for example.
> > > > >
> > > > > In order to improve the situation, adjusting parent rate is considered
> > > > > when allowed.
> > > > >
> > > > > This code is inspired by clk_divider_bestdiv() function, which does
> > > > > basically the same thing for different clock type.
> > > >
> > > > This patch seems to break the eMMC support on Olinuxino-Lime2-eMMC
> > > > boards:
> > > >
> > > > EXT4-fs (mmcblk1p4): INFO: recovery required on readonly filesystem
> > > > EXT4-fs (mmcblk1p4): write access will be enabled during recovery
> > > > sunxi-mmc 1c11000.mmc: data error, sending stop command
> > > > sunxi-mmc 1c11000.mmc: send stop command failed
> > >
> > > I'm not familiar with A20. What is interesting is that emmc clocks don't
> > > have CLK_SET_RATE_PARENT flag set, so you shouldn't see any difference.
> > >
> > > Can you post content of clk_summary with and without this patch?
> >
> > In both cases I booted from FEL with rootfs on sdcard and tried to mount
> > partition from eMMC to /mnt. With your patch, last step it fails.
> >
> > pre-patch working:
> > pll-ddr-other[768MHz] -> mmc2[512MHz]. (For some reason ahb-mmc2 is off?)
> >
> > post-patch not working:
> > pll-periph[600MHz] -> mmc2[500Mhz], (ahb-mmc2 is enabled)
> >
> > Also, attached the logs.
>
> Thanks. Just one more request. Can you enable debug messages in mmc driver?
> I'm interested in output of this line:
>
> dev_dbg(mmc_dev(mmc), "setting clk to %d, rounded %ld\n",
> clock, rate);

1c11000 is eMMC:
[snip]
[ 1.961644] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.004091] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.020296] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.039917] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.047847] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.055053] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.065256] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.092351] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.168725] sunxi-mmc 1c11000.mmc: setting clk to 400000, rounded 400000
[ 2.189403] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000
[ 2.203340] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000
[ 2.211412] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000
[ 4.967865] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000
[ 8.755345] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000
[ 9.082510] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000

Here I tried to mount partition from eMMC...

[ 72.167311] sunxi-mmc 1c11000.mmc: setting clk to 52000000, rounded 52000000
[ 72.269629] sunxi-mmc 1c11000.mmc: data error, sending stop command
[ 73.268999] sunxi-mmc 1c11000.mmc: send stop command failed
[/snip]

And clock tree:
[snip]
pll-periph-base 3 3 0 1200000000 0 0 50000
pll-periph 6 6 0 600000000 0 0 50000
mmc2 3 3 0 50000000 0 0 50000
mmc2_sample 1 1 0 50000000 0 120 50000
mmc2_output 1 1 0 50000000 0 60 50000
ahb 18 18 0 300000000 0 0 50000
ahb-mmc2 1 1 0 300000000 0 0 50000
[/snip]

And without patch:
[snip]
[ 2.003341] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.019479] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.039144] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.047129] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.054324] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.064481] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.091624] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.168067] sunxi-mmc 1c11000.mmc: XXX: setting clk to 400000, rounded 400000
[ 2.188239] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 2.202779] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 2.210817] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 5.103358] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 8.950237] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 9.376201] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 113.618387] sunxi-mmc 1c11000.mmc: XXX: setting clk to 52000000, rounded 51200000
[ 113.707979] EXT4-fs (mmcblk1p4): recovery complete
[ 113.728162] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null)
[/snip]

And clock tree:
[snip]
pll-ddr-base 2 2 0 768000000 0 0 50000
pll-ddr-other 1 1 0 768000000 0 0 50000
mmc2 0 0 0 51200000 0 0 50000
mmc2_sample 0 0 0 51200000 0 120 50000
mmc2_output 0 0 0 51200000 0 72 50000
[/snip]

>
> Just wondering what it should be.
>
> Best regards,
> Jernej
>
> >
> > > Best regards,
> > > Jernej
> > >
> > > > $ git bisect log
> > > > git bisect start
> > > > # good: [3df407b2a5346db1c48809706ece7a8616c79e0b] mmc:
> > > > dw_mmc-bluefield:
> > > > simplify the probe() function git bisect good
> > > > 3df407b2a5346db1c48809706ece7a8616c79e0b
> > > > # bad: [00d59fde8532b2d42e80909d2e58678755e04da9] Merge tag 'mmc-v4.21'
> > > > of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc git bisect bad
> > > > 00d59fde8532b2d42e80909d2e58678755e04da9
> > > > # good: [01e421feec0817bb3141eaae4c517410d193d440] Merge branch 'fixes'
> > > > into next git bisect good 01e421feec0817bb3141eaae4c517410d193d440
> > > > # bad: [1eefdec18eded41833401cfd64749643ff72e7da] Merge branch
> > > > 'locking-core-for-linus' of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip git bisect bad
> > > > 1eefdec18eded41833401cfd64749643ff72e7da
> > > > # good: [eaa76499711535fd64d747cc4ef0d78ab0fd41c6] Merge tag
> > > > 'mtd/for-4.21'
> > > > of git://git.infradead.org/linux-mtd git bisect good
> > > > eaa76499711535fd64d747cc4ef0d78ab0fd41c6
> > > > # good: [4e4390ad067a61ce4e7607bd0df31f19a4caa36a] Merge tag
> > > > 'leds-for-4.21-rc1' of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
> > > > git
> > > > bisect good 4e4390ad067a61ce4e7607bd0df31f19a4caa36a
> > > > # bad: [c2f1f3e0e17d94ab0c66d83e669492cb9e9a3698] Merge
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next git
> > > > bisect
> > > > bad c2f1f3e0e17d94ab0c66d83e669492cb9e9a3698
> > > > # bad: [e4b99d415c3908581d4703203e1e805f043a3e71] Merge branch
> > > > 'irq-core-for-linus' of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip git bisect bad
> > > > e4b99d415c3908581d4703203e1e805f043a3e71
> > > > # bad: [ffe05540d18013db62c43627836a3638e9a2c7aa] Merge branches
> > > > 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and
> > > > 'clk-rockchip'
> > > > into clk-next git bisect bad ffe05540d18013db62c43627836a3638e9a2c7aa
> > > > # good: [1a501c8defe950571316d5ddd917bf44f5ed7bd4] Merge branches
> > > > 'clk-managed-registration', 'clk-spdx', 'clk-remove-basic' and
> > > > 'clk-ops-const' into clk-next git bisect good
> > > > 1a501c8defe950571316d5ddd917bf44f5ed7bd4
> > > > # good: [e74581b79ddd9b49b8c61e2791fc4dffc0245afb] Merge tag
> > > > 'meson-clk-4.21-2' of https://github.com/BayLibre/clk-meson into
> > > > clk-meson
> > > > git bisect good e74581b79ddd9b49b8c61e2791fc4dffc0245afb
> > > > # good: [60baf75e3f5b76043c25328ac0c5320aaef5ea41] Merge tag
> > > > 'clk-renesas-for-v4.21-tag2' of
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into
> > > > clk-renesas git bisect good 60baf75e3f5b76043c25328ac0c5320aaef5ea41
> > > > # bad: [a41f85b6017ee20952a60e4330bcae2527fe2c2a] Merge tag
> > > > 'sunxi-clk-for-4.21' of
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into
> > > > clk-allwinner git bisect bad a41f85b6017ee20952a60e4330bcae2527fe2c2a
> > > > # bad: [ee678706e46d0d185c27cc214ad97828e0643159] clk: sunxi-ng: a64:
> > > > Fix
> > > > gate bit of DSI DPHY git bisect bad
> > > > ee678706e46d0d185c27cc214ad97828e0643159
> > > > # bad: [65b6657672388b72822e0367f06d41c1e3ffb5bb] clk: sunxi-ng: Use u64
> > > > for calculation of NM rate git bisect bad
> > > > 65b6657672388b72822e0367f06d41c1e3ffb5bb
> > > > # good: [db7548934603d9eda12649dff97ea5c29884405d] clk: sunxi-ng:
> > > > sun50i:
> > > > h6: Fix MMC clock mux width git bisect good
> > > > db7548934603d9eda12649dff97ea5c29884405d
> > > > # bad: [3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15] clk: sunxi-ng: Adjust
> > > > MP
> > > > clock parent rate when allowed git bisect bad
> > > > 3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15
> > > > # first bad commit: [3f790433c3cb27ecaf2ca0e07ac25964e4fd9f15] clk:
> > > > sunxi-ng: Adjust MP clock parent rate when allowed
> > > >
> > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > > > > ---
> > > > >
> > > > > drivers/clk/sunxi-ng/ccu_mp.c | 64
> > > > > +++++++++++++++++++++++++++++++++--
> > > > > 1 file changed, 62 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/clk/sunxi-ng/ccu_mp.c
> > > > > b/drivers/clk/sunxi-ng/ccu_mp.c
> > > > > index 5d0af4051737..0357349eb767 100644
> > > > > --- a/drivers/clk/sunxi-ng/ccu_mp.c
> > > > > +++ b/drivers/clk/sunxi-ng/ccu_mp.c
> > > > > @@ -40,6 +40,61 @@ static void ccu_mp_find_best(unsigned long parent,
> > > > > unsigned long rate,>
> > > > >
> > > > > *p = best_p;
> > > > >
> > > > > }
> > > > >
> > > > > +static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw
> > > > > *hw,
> > > > > +
> > >
> > > unsigned long *parent,
> > >
> > > > > +
> > >
> > > unsigned long rate,
> > >
> > > > > +
> > >
> > > unsigned int max_m,
> > >
> > > > > +
> > >
> > > unsigned int max_p)
> > >
> > > > > +{
> > > > > + unsigned long parent_rate_saved;
> > > > > + unsigned long parent_rate, now;
> > > > > + unsigned long best_rate = 0;
> > > > > + unsigned int _m, _p, div;
> > > > > + unsigned long maxdiv;
> > > > > +
> > > > > + parent_rate_saved = *parent;
> > > > > +
> > > > > + /*
> > > > > + * The maximum divider we can use without overflowing
> > > > > + * unsigned long in rate * m * p below
> > > > > + */
> > > > > + maxdiv = max_m * max_p;
> > > > > + maxdiv = min(ULONG_MAX / rate, maxdiv);
> > > > > +
> > > > > + for (_p = 1; _p <= max_p; _p <<= 1) {
> > > > > + for (_m = 1; _m <= max_m; _m++) {
> > > > > + div = _m * _p;
> > > > > +
> > > > > + if (div > maxdiv)
> > > > > + break;
> > > > > +
> > > > > + if (rate * div == parent_rate_saved) {
> > > > > + /*
> > > > > + * It's the most ideal case if
> > >
> > > the requested
> > >
> > > > > + * rate can be divided from
> > >
> > > parent clock without
> > >
> > > > > + * needing to change parent
> rate,
> > >
> > > so return the
> > >
> > > > > + * divider immediately.
> > > > > + */
> > > > > + *parent = parent_rate_saved;
> > > > > + return rate;
> > > > > + }
> > > > > +
> > > > > + parent_rate = clk_hw_round_rate(hw, rate *
> > >
> > > div);
> > >
> > > > > + now = parent_rate / div;
> > > > > +
> > > > > + if (now <= rate && now > best_rate) {
> > > > > + best_rate = now;
> > > > > + *parent = parent_rate;
> > > > > +
> > > > > + if (now == rate)
> > > > > + return rate;
> > > > > + }
> > > > > + }
> > > > > + }
> > > > > +
> > > > > + return best_rate;
> > > > > +}
> > > > > +
> > > > >
> > > > > static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
> > > > >
> > > > > struct clk_hw *hw,
> > > > > unsigned long
> > >
> > > *parent_rate,
> > >
> > > > > @@ -56,8 +111,13 @@ static unsigned long ccu_mp_round_rate(struct
> > > > > ccu_mux_internal *mux,>
> > > > >
> > > > > max_m = cmp->m.max ?: 1 << cmp->m.width;
> > > > > max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
> > > > >
> > > > > - ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
> > > > > - rate = *parent_rate / p / m;
> > > > > + if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
> > > > > + ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m,
> > >
> > > &p);
> > >
> > > > > + rate = *parent_rate / p / m;
> > > > > + } else {
> > > > > + rate = ccu_mp_find_best_with_parent_adj(hw,
> parent_rate,
> > >
> > > rate,
> > >
> > > > > +
> > >
> > > max_m, max_p);
> > >
> > > > > + }
> > > > >
> > > > > if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
> > > > >
> > > > > rate /= cmp->fixed_post_div;
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit https://groups.google.com/d/optout.

Next message: YueHaibing: "[PATCH -next] perf: remove duplicated include from perf_event.h"
Previous message: YueHaibing: "[PATCH net-next] qed: remove duplicated include from qed_if.h"
In reply to: Jernej Åkrabec: "Re: [linux-sunxi] [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed"
Next in thread: Jernej Åkrabec: "Re: [linux-sunxi] [PATCH v3 02/28] clk: sunxi-ng: Adjust MP clock parent rate when allowed"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]