Re: [PATCH v5 2/6] media: sun6i: Add mod_rate quirk

[Maxime Ripard]

On Fri, Jan 11, 2019 at 11:54:12AM +0530, Jagan Teki wrote:
> On Mon, Jan 7, 2019 at 6:59 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > On Mon, Dec 24, 2018 at 08:57:48PM +0530, Jagan Teki wrote:
> > > On Fri, Dec 21, 2018 at 6:30 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > > >
> > > > On Thu, Dec 20, 2018 at 06:24:34PM +0530, Jagan Teki wrote:
> > > > > Unfortunately default CSI_SCLK rate cannot work properly to
> > > > > drive the connected sensor interface, particularly on few
> > > > > Allwinner SoC's like A64.
> > > > >
> > > > > So, add mod_rate quirk via driver data so-that the respective
> > > > > SoC's which require to alter the default mod clock rate can assign
> > > > > the operating clock rate.
> > > > >
> > > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > > > ---
> > > > >  .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 34 +++++++++++++++----
> > > > >  1 file changed, 28 insertions(+), 6 deletions(-)
> > > > >
> > > > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > > > index ee882b66a5ea..fe002beae09c 100644
> > > > > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > > > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > > > @@ -15,6 +15,7 @@
> > > > >  #include <linux/ioctl.h>
> > > > >  #include <linux/module.h>
> > > > >  #include <linux/of.h>
> > > > > +#include <linux/of_device.h>
> > > > >  #include <linux/platform_device.h>
> > > > >  #include <linux/pm_runtime.h>
> > > > >  #include <linux/regmap.h>
> > > > > @@ -28,8 +29,13 @@
> > > > >
> > > > >  #define MODULE_NAME  "sun6i-csi"
> > > > >
> > > > > +struct sun6i_csi_variant {
> > > > > +     unsigned long                   mod_rate;
> > > > > +};
> > > > > +
> > > > >  struct sun6i_csi_dev {
> > > > >       struct sun6i_csi                csi;
> > > > > +     const struct sun6i_csi_variant  *variant;
> > > > >       struct device                   *dev;
> > > > >
> > > > >       struct regmap                   *regmap;
> > > > > @@ -822,33 +828,43 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev,
> > > > >               return PTR_ERR(sdev->clk_mod);
> > > > >       }
> > > > >
> > > > > +     if (sdev->variant->mod_rate)
> > > > > +             clk_set_rate_exclusive(sdev->clk_mod, sdev->variant->mod_rate);
> > > > > +
> > > >
> > > > It still doesn't make any sense to do it in the probe function...
> > >
> > > I'm not sure we discussed about the context wrt probe, we discussed
> > > about exclusive put clock.
> >
> > https://lkml.org/lkml/2018/12/18/584
> >
> > "Doing it here is not really optimal either, since you'll put a
> > constraint on the system (maintaining that clock at 300MHz), while
> > it's not in use."
> 
> But this constraint is only set, for SoC's who need mod_rate change
> not for whole SoCs.

Still, that constraint is there for the whole system on affected
SoCs. Whether it applies to one SoC or not is not really relevant.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature