[PATCH v6 1/3] dt-bindings: thermal: Add binding document for SR thermal

From: Srinath Mannam
Date: Thu Jan 03 2019 - 03:55:56 EST


From: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>

Add binding document for supported thermal implementation
in Stingray.

Signed-off-by: Pramod Kumar <pramod.kumar@xxxxxxxxxxxx>
Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
.../bindings/thermal/brcm,sr-thermal.txt | 105 +++++++++++++++++++++
1 file changed, 105 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
new file mode 100644
index 0000000..3ab3302
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
@@ -0,0 +1,105 @@
+* Broadcom Stingray Thermal
+
+This binding describes thermal sensors that is part of Stingray SoCs.
+
+Required properties:
+- compatible : Must be "brcm,sr-thermal"
+- reg : Memory where tmon data will be available.
+- brcm,tmon-mask: A one cell bit mask of valid TMON sources.
+ Each bit represents single TMON source.
+- #thermal-sensor-cells : Thermal sensor phandler
+- polling-delay: Max number of milliseconds to wait between polls.
+- thermal-sensors: A list of thermal sensor phandles and specifier.
+ specifier value is tmon ID and it should be
+ in correspond with brcm,tmon-mask.
+- temperature: trip temperature threshold in millicelsius.
+
+Example:
+ tmons {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x8f100000 0x100>;
+
+ tmon: tmon@0 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x0 0x40>;
+ brcm,tmon-mask = <0x3f>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ ihost0_thermal: ihost0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 0>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost1_thermal: ihost1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 1>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost2_thermal: ihost2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 2>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost3_thermal: ihost3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 3>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ crmu_thermal: crmu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 4>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ nitro_thermal: nitro-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 5>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
--
2.7.4