[PATCH v2 2/4] clk: meson: clk-regmap: add read-only gate ops

[Martin Blumenstingl]

Some of the gate clocks are described as "just in case" bits in the
datasheet. Examples are the ABP, PERIPH, AXI and L2 DRAM clocks on
Meson8b.
The datasheet suggests that these bits are not touched. The full
explanation is:
"Set to 1 to manually disable the [...] clock when changing the mux
selection. Typically this bit is set to 0 since the clock muxes can
switch without glitches.".

This adds new read-only ops for gate clocks so we can describe these
clocks in our clock controller drivers while ensuring that we can't
accidentally modify the registers.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
 drivers/clk/meson/clk-regmap.c | 5 +++++
 drivers/clk/meson/clk-regmap.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
index 305ee307c003..c515f67322a3 100644
--- a/drivers/clk/meson/clk-regmap.c
+++ b/drivers/clk/meson/clk-regmap.c
@@ -50,6 +50,11 @@ const struct clk_ops clk_regmap_gate_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_regmap_gate_ops);
 
+const struct clk_ops clk_regmap_gate_ro_ops = {
+	.is_enabled = clk_regmap_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_gate_ro_ops);
+
 static unsigned long clk_regmap_div_recalc_rate(struct clk_hw *hw,
 						unsigned long prate)
 {
diff --git a/drivers/clk/meson/clk-regmap.h b/drivers/clk/meson/clk-regmap.h
index ed2d4348dbe2..e9c5728d40eb 100644
--- a/drivers/clk/meson/clk-regmap.h
+++ b/drivers/clk/meson/clk-regmap.h
@@ -51,6 +51,7 @@ clk_get_regmap_gate_data(struct clk_regmap *clk)
 }
 
 extern const struct clk_ops clk_regmap_gate_ops;
+extern const struct clk_ops clk_regmap_gate_ro_ops;
 
 /**
  * struct clk_regmap_div_data - regmap backed adjustable divider specific data
-- 
2.19.1