Re: [PATCH 1/2] spi: Add Renesas R-Car RPC SPI controller driver

[Marek Vasut]

On 11/19/2018 11:01 AM, Mason Yang wrote:
> Add a driver for Renesas R-Car D3 RPC SPI controller driver.

The RPC supports both HF and SPI, not just SPI. And it's present in all
of Gen3 , not just D3 .

[...]

> +++ b/drivers/spi/spi-renesas-rpc.c
> @@ -0,0 +1,750 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
> +// Copyright (C) 2018 Macronix International Co., Ltd.
> +//
> +// R-Car D3 RPC SPI/QSPI/Octa driver
> +//
> +// Authors:
> +//	Mason Yang <masonccyang@xxxxxxxxxxx>
> +//

Fix multiline comment please.

> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/spi-mem.h>

[...]

> +#define RPC_CMNSR		0x0048	/* R */
> +#define RPC_CMNSR_SSLF		BIT(1)
> +#define	RPC_CMNSR_TEND		BIT(0)

#define[SPACE] instead of tab

> +#define RPC_DRDMCR		0x0058	/* R/W */
> +#define RPC_DRDRENR		0x005C	/* R/W */
> +
> +#define RPC_SMDMCR		0x0060	/* R/W */
> +#define RPC_SMDMCR_DMCYC(v)	((((v) - 1) & 0x1F) << 0)
> +
> +#define RPC_SMDRENR		0x0064	/* R/W */
> +#define RPC_SMDRENR_HYPE	(0x5 << 12)
> +#define RPC_SMDRENR_ADDRE	BIT(8)
> +#define RPC_SMDRENR_OPDRE	BIT(4)
> +#define RPC_SMDRENR_SPIDRE	BIT(0)
> +
> +#define RPC_PHYCNT		0x007C	/* R/W */
> +#define RPC_PHYCNT_CAL		BIT(31)
> +#define PRC_PHYCNT_OCTA_AA	BIT(22)
> +#define PRC_PHYCNT_OCTA_SA	BIT(23)
> +#define PRC_PHYCNT_EXDS		BIT(21)
> +#define RPC_PHYCNT_OCT		BIT(20)
> +#define RPC_PHYCNT_STRTIM(v)	(((v) & 0x7) << 15)
> +#define RPC_PHYCNT_WBUF2	BIT(4)
> +#define RPC_PHYCNT_WBUF		BIT(2)
> +#define RPC_PHYCNT_MEM(v)	(((v) & 0x3) << 0)
> +
> +#define RPC_PHYOFFSET1		0x0080	/* R/W */
> +#define RPC_PHYOFFSET2		0x0084	/* R/W */
> +
> +#define RPC_WBUF		0x8000	/* Write Buffer */
> +#define RPC_WBUF_SIZE		256	/* Write Buffer size */
> +
> +struct rpc_spi {
> +	struct clk *clk_rpc;
> +	void __iomem *regs;
> +	struct {
> +		void __iomem *map;
> +		dma_addr_t dma;
> +		size_t size;
> +	} linear;

Does this need it's own struct ?

> +	u32 cur_speed_hz;
> +	u32 cmd;
> +	u32 addr;
> +	u32 dummy;
> +	u32 smcr;
> +	u32 smenr;
> +	u32 xferlen;
> +	u32 totalxferlen;

This register cache might be a good candidate for regmap ?

> +	enum spi_mem_data_dir xfer_dir;
> +};
> +
> +static int rpc_spi_set_freq(struct rpc_spi *rpc, unsigned long freq)
> +{
> +	int ret;
> +
> +	if (rpc->cur_speed_hz == freq)
> +		return 0;
> +
> +	clk_disable_unprepare(rpc->clk_rpc);
> +	ret = clk_set_rate(rpc->clk_rpc, freq);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_prepare_enable(rpc->clk_rpc);
> +	if (ret)
> +		return ret;

Is this clock disable/update/enable really needed ? I'd think that
clk_set_rate() would handle the rate update correctly.

> +	rpc->cur_speed_hz = freq;
> +	return ret;
> +}
> +
> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
> +{
> +	/*
> +	 * NOTE: The 0x260 are undocumented bits, but they must be set.
> +	 */

FYI:
http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/spi/renesas_rpc_spi.c#l207

I think the STRTIM should be 6 .

> +	writel(RPC_PHYCNT_CAL | RPC_PHYCNT_STRTIM(0x3) | 0x260,
> +	       rpc->regs + RPC_PHYCNT);
> +
> +	/*
> +	 * NOTE: The 0x31511144 and 0x431 are undocumented bits,
> +	 *	 but they must be set for RPC_PHYOFFSET1 & RPC_PHYOFFSET2.
> +	 */
> +	writel(0x31511144, rpc->regs + RPC_PHYOFFSET1);
> +	writel(0x431, rpc->regs + RPC_PHYOFFSET2);
> +
> +	writel(RPC_SSLDR_SPNDL(7) | RPC_SSLDR_SLNDL(7) |
> +	       RPC_SSLDR_SCKDL(7), rpc->regs + RPC_SSLDR);
> +}
> +
> +static int wait_msg_xfer_end(struct rpc_spi *rpc)
> +{
> +	u32 sts;
> +
> +	return readl_poll_timeout(rpc->regs + RPC_CMNSR, sts,
> +				  sts & RPC_CMNSR_TEND, 0, USEC_PER_SEC);
> +}
> +
> +static u8 rpc_bits_xfer(u32 nbytes)
> +{
> +	u8 databyte;
> +
> +	switch (nbytes) {

Did you ever test unaligned writes and reads ? There are some nasty edge
cases in those.

Also, I think you can calculate the number of set bits using a simple
function, so the switch-case might not even be needed.

> +	case 1:
> +		databyte = 0x8;
> +		break;
> +	case 2:
> +		databyte = 0xc;
> +		break;
> +	default:
> +		databyte = 0xf;
> +		break;
> +	}
> +
> +	return databyte;
> +}
> +
> +static int rpc_spi_io_xfer(struct rpc_spi *rpc,
> +			   const void *tx_buf, void *rx_buf)
> +{
> +	u32 smenr, smcr, data, pos = 0;
> +	int ret = 0;
> +
> +	writel(RPC_CMNCR_MD | RPC_CMNCR_SFDE | RPC_CMNCR_MOIIO_HIZ |
> +	       RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0), rpc->regs + RPC_CMNCR);
> +	writel(0x0, rpc->regs + RPC_SMDRENR);
> +
> +	if (tx_buf) {
> +		writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> +		writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> +		writel(rpc->addr, rpc->regs + RPC_SMADR);
> +		smenr = rpc->smenr;
> +
> +		while (pos < rpc->xferlen) {
> +			u32 nbytes = rpc->xferlen  - pos;
> +
> +			writel(*(u32 *)(tx_buf + pos), rpc->regs + RPC_SMWDR0);
> +
> +			if (nbytes > 4) {
> +				nbytes = 4;
> +				smcr = rpc->smcr |
> +				       RPC_SMCR_SPIE | RPC_SMCR_SSLKP;
> +			} else {
> +				smcr = rpc->smcr | RPC_SMCR_SPIE;
> +			}
> +
> +			writel(smenr, rpc->regs + RPC_SMENR);
> +			writel(smcr, rpc->regs + RPC_SMCR);
> +			ret = wait_msg_xfer_end(rpc);
> +			if (ret)
> +				goto out;
> +
> +			pos += nbytes;
> +			smenr = rpc->smenr & ~RPC_SMENR_CDE &
> +					     ~RPC_SMENR_ADE(0xf);
> +		}
> +	} else if (rx_buf) {
> +		while (pos < rpc->xferlen) {
> +			u32 nbytes = rpc->xferlen  - pos;
> +
> +			if (nbytes > 4)
> +				nbytes = 4;
> +
> +			writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> +			writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> +			writel(rpc->addr + pos, rpc->regs + RPC_SMADR);
> +			writel(rpc->smenr, rpc->regs + RPC_SMENR);
> +			writel(rpc->smcr | RPC_SMCR_SPIE, rpc->regs + RPC_SMCR);
> +			ret = wait_msg_xfer_end(rpc);
> +			if (ret)
> +				goto out;
> +
> +			data = readl(rpc->regs + RPC_SMRDR0);
> +			memcpy_fromio(rx_buf + pos, (void *)&data, nbytes);
> +			pos += nbytes;
> +		}
> +	} else {
> +		writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> +		writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> +		writel(rpc->addr + pos, rpc->regs + RPC_SMADR);
> +		writel(rpc->smenr, rpc->regs + RPC_SMENR);
> +		writel(rpc->smcr | RPC_SMCR_SPIE, rpc->regs + RPC_SMCR);
> +		ret = wait_msg_xfer_end(rpc);
> +	}
> +out:

Dont you need to stop the RPC somehow in case the transmission fails ?

> +	return ret;
> +}
> +
> +static void rpc_spi_mem_set_prep_op_cfg(struct spi_device *spi,
> +					const struct spi_mem_op *op,
> +					u64 *offs, size_t *len)
> +{
> +	struct rpc_spi *rpc = spi_master_get_devdata(spi->master);
> +
> +	rpc->cmd = RPC_SMCMR_CMD(op->cmd.opcode);
> +	rpc->smenr = RPC_SMENR_CDE |
> +		     RPC_SMENR_CDB(fls(op->cmd.buswidth >> 1));
> +	rpc->totalxferlen = 1;
> +	rpc->xferlen = 0;
> +	rpc->addr = 0;
> +
> +	if (op->addr.nbytes) {
> +		rpc->smenr |= RPC_SMENR_ADB(fls(op->addr.buswidth >> 1));
> +		if (op->addr.nbytes == 4)
> +			rpc->smenr |= RPC_SMENR_ADE(0xf);
> +		else
> +			rpc->smenr |= RPC_SMENR_ADE(0x7);
> +
> +		if (!offs && !len)
> +			rpc->addr = *(u32 *)offs;

How does this work ? Shouldn't this be just *offs to dereference the
pointer ?

> +		else
> +			rpc->addr = op->addr.val;
> +		rpc->totalxferlen += op->addr.nbytes;
> +	}
> +
> +	if (op->dummy.nbytes) {
> +		rpc->smenr |= RPC_SMENR_DME;
> +		rpc->dummy = RPC_SMDMCR_DMCYC(op->dummy.nbytes);
> +		rpc->totalxferlen += op->dummy.nbytes;
> +	}
> +
> +	if (op->data.nbytes || (offs && len)) {
> +		rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer(op->data.nbytes)) |
> +			      RPC_SMENR_SPIDB(fls(op->data.buswidth >> 1));
> +
> +		if (op->data.dir == SPI_MEM_DATA_IN) {
> +			rpc->smcr = RPC_SMCR_SPIRE;
> +			rpc->xfer_dir = SPI_MEM_DATA_IN;
> +		} else if (op->data.dir == SPI_MEM_DATA_OUT) {
> +			rpc->smcr = RPC_SMCR_SPIWE;
> +			rpc->xfer_dir = SPI_MEM_DATA_OUT;
> +		}
> +
> +		if (offs && len) {
> +			rpc->xferlen = *(u32 *)len;
> +			rpc->totalxferlen += *(u32 *)len;
> +		} else {
> +			rpc->xferlen = op->data.nbytes;
> +			rpc->totalxferlen += op->data.nbytes;
> +		}
> +	}
> +}
> +
> +static bool rpc_spi_mem_supports_op(struct spi_mem *mem,
> +				    const struct spi_mem_op *op)
> +{
> +	if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
> +	    op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
> +		return false;
> +
> +	if (op->addr.nbytes > 4)
> +		return false;
> +
> +	return true;
> +}
> +
> +static ssize_t rpc_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
> +				       u64 offs, size_t len, void *buf)
> +{
> +	struct rpc_spi *rpc = spi_master_get_devdata(desc->mem->spi->master);
> +	int ret;
> +
> +	if (WARN_ON(offs + desc->info.offset + len > U32_MAX))
> +		return -EINVAL;
> +
> +	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
> +	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> +				    &desc->info.op_tmpl, &offs, &len);
> +
> +	writel(RPC_CMNCR_SFDE | RPC_CMNCR_MOIIO_HIZ |
> +	       RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0), rpc->regs + RPC_CMNCR);
> +
> +	writel(RPC_DRCR_RBURST(0x1f) | RPC_DRCR_RBE, rpc->regs + RPC_DRCR);
> +	writel(rpc->cmd, rpc->regs + RPC_DRCMR);
> +	writel(RPC_DREAR_EAC, rpc->regs + RPC_DREAR);
> +	writel(0, rpc->regs + RPC_DROPR);
> +	writel(rpc->smenr, rpc->regs + RPC_DRENR);
> +	writel(rpc->dummy, rpc->regs + RPC_DRDMCR);
> +	writel(0x0, rpc->regs + RPC_DRDRENR);
> +	memcpy_fromio(buf, rpc->linear.map + desc->info.offset + offs, len);
> +
> +	return len;
> +}
> +
> +static ssize_t rpc_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
> +					u64 offs, size_t len, const void *buf)
> +{
> +	struct rpc_spi *rpc = spi_master_get_devdata(desc->mem->spi->master);
> +	int tx_offs, ret;
> +
> +	if (WARN_ON(offs + desc->info.offset + len > U32_MAX))
> +		return -EINVAL;
> +
> +	if (WARN_ON(len > RPC_WBUF_SIZE))
> +		return -EIO;
> +
> +	ret = rpc_spi_set_freq(rpc, desc->mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
> +	rpc_spi_mem_set_prep_op_cfg(desc->mem->spi,
> +				    &desc->info.op_tmpl, &offs, &len);
> +
> +	writel(RPC_CMNCR_MD | RPC_CMNCR_SFDE | RPC_CMNCR_MOIIO_HIZ |
> +	       RPC_CMNCR_IOFV_HIZ | RPC_CMNCR_BSZ(0), rpc->regs + RPC_CMNCR);
> +	writel(0x0, rpc->regs + RPC_SMDRENR);
> +
> +	writel(RPC_PHYCNT_CAL | 0x260 | RPC_PHYCNT_WBUF2 | RPC_PHYCNT_WBUF,
> +	       rpc->regs + RPC_PHYCNT);
> +
> +	for (tx_offs = 0; tx_offs < RPC_WBUF_SIZE; tx_offs += 4)
> +		writel(*(u32 *)(buf + tx_offs), rpc->regs + RPC_WBUF + tx_offs);

Isn't this some memcpy_toio() or iowrite32_rep() reimplementation here ?

> +	writel(rpc->cmd, rpc->regs + RPC_SMCMR);
> +	writel(offs, rpc->regs + RPC_SMADR);
> +	writel(rpc->smenr, rpc->regs + RPC_SMENR);
> +	writel(rpc->smcr | RPC_SMCR_SPIE, rpc->regs + RPC_SMCR);
> +	ret = wait_msg_xfer_end(rpc);
> +	if (ret)
> +		goto out;
> +
> +	writel(RPC_DRCR_RCF, rpc->regs + RPC_DRCR);
> +	writel(RPC_PHYCNT_CAL | RPC_PHYCNT_STRTIM(0) | 0x260,
> +	       rpc->regs + RPC_PHYCNT);
> +
> +	return len;
> +out:

Shouldn't you shut the controller down if the xfer fails ?

> +	return ret;
> +}
> +
> +static int rpc_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
> +{
> +	struct rpc_spi *rpc = spi_master_get_devdata(desc->mem->spi->master);
> +
> +	if (desc->info.offset + desc->info.length > U32_MAX)
> +		return -ENOTSUPP;
> +
> +	if (!rpc_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
> +		return -ENOTSUPP;
> +
> +	if (!rpc->linear.map &&
> +	    desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN)
> +		return -ENOTSUPP;
> +
> +	return 0;
> +}
> +
> +static int rpc_spi_mem_exec_op(struct spi_mem *mem,
> +			       const struct spi_mem_op *op)
> +{
> +	struct rpc_spi *rpc = spi_master_get_devdata(mem->spi->master);
> +	int ret;
> +
> +	ret = rpc_spi_set_freq(rpc, mem->spi->max_speed_hz);
> +	if (ret)
> +		return ret;
> +
> +	rpc_spi_mem_set_prep_op_cfg(mem->spi, op, NULL, NULL);
> +
> +	ret = rpc_spi_io_xfer(rpc,
> +			      op->data.dir == SPI_MEM_DATA_OUT ?
> +			      op->data.buf.out : NULL,
> +			      op->data.dir == SPI_MEM_DATA_IN ?
> +			      op->data.buf.in : NULL);
> +
> +	return ret;
> +}
> +
> +static const struct spi_controller_mem_ops rpc_spi_mem_ops = {
> +	.supports_op = rpc_spi_mem_supports_op,
> +	.exec_op = rpc_spi_mem_exec_op,
> +	.dirmap_create = rpc_spi_mem_dirmap_create,
> +	.dirmap_read = rpc_spi_mem_dirmap_read,
> +	.dirmap_write = rpc_spi_mem_dirmap_write,
> +};
> +
> +static void rpc_spi_transfer_setup(struct rpc_spi *rpc,
> +				   struct spi_message *msg)
> +{
> +	struct spi_transfer *t, xfer[4] = { };
> +	u32 i, xfercnt, xferpos = 0;
> +
> +	rpc->totalxferlen = 0;
> +	list_for_each_entry(t, &msg->transfers, transfer_list) {
> +		if (t->tx_buf) {
> +			xfer[xferpos].tx_buf = t->tx_buf;
> +			xfer[xferpos].tx_nbits = t->tx_nbits;
> +		}
> +
> +		if (t->rx_buf) {
> +			xfer[xferpos].rx_buf = t->rx_buf;
> +			xfer[xferpos].rx_nbits = t->rx_nbits;
> +		}
> +
> +		if (t->len) {
> +			xfer[xferpos++].len = t->len;
> +			rpc->totalxferlen += t->len;
> +		}
> +	}
> +
> +	xfercnt = xferpos;
> +	rpc->xferlen = xfer[--xferpos].len;
> +	rpc->cmd = RPC_SMCMR_CMD(((u8 *)xfer[0].tx_buf)[0]);

Is the cast needed ?

> +	rpc->smenr = RPC_SMENR_CDE | RPC_SMENR_CDB(fls(xfer[0].tx_nbits >> 1));
> +	rpc->addr = 0;
> +
> +	if (xfercnt > 2 && xfer[1].len && xfer[1].tx_buf) {
> +		rpc->smenr |= RPC_SMENR_ADB(fls(xfer[1].tx_nbits >> 1));
> +		for (i = 0; i < xfer[1].len; i++)
> +			rpc->addr |= (u32)((u8 *)xfer[1].tx_buf)[i]
> +					<< (8 * (xfer[1].len - i - 1));
> +
> +		if (xfer[1].len == 4)
> +			rpc->smenr |= RPC_SMENR_ADE(0xf);
> +		else
> +			rpc->smenr |= RPC_SMENR_ADE(0x7);
> +	}
> +
> +	switch (xfercnt) {
> +	case 2:
> +		if (xfer[1].rx_buf) {
> +			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> +				      (xfer[1].len)) | RPC_SMENR_SPIDB(fls
> +				      (xfer[1].rx_nbits >> 1));

How much of this register value calculation could be somehow
deduplicated ? It seems to be almost the same thing copied thrice here.

> +			rpc->smcr = RPC_SMCR_SPIRE;
> +			rpc->xfer_dir = SPI_MEM_DATA_IN;
> +		} else if (xfer[1].tx_buf) {
> +			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> +				      (xfer[1].len)) | RPC_SMENR_SPIDB(fls
> +				      (xfer[1].tx_nbits >> 1));
> +			rpc->smcr = RPC_SMCR_SPIWE;
> +			rpc->xfer_dir = SPI_MEM_DATA_OUT;
> +		}
> +		break;
> +
> +	case 3:
> +		if (xfer[2].len && xfer[2].rx_buf && !xfer[2].tx_buf) {
> +			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> +				      (xfer[2].len)) | RPC_SMENR_SPIDB(fls
> +				      (xfer[2].rx_nbits >> 1));
> +			rpc->smcr = RPC_SMCR_SPIRE;
> +			rpc->xfer_dir = SPI_MEM_DATA_IN;
> +		} else if (xfer[2].len && xfer[2].tx_buf && !xfer[2].rx_buf) {
> +			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> +				      (xfer[2].len)) | RPC_SMENR_SPIDB(fls
> +				      (xfer[2].tx_nbits >> 1));
> +			rpc->smcr = RPC_SMCR_SPIWE;
> +			rpc->xfer_dir = SPI_MEM_DATA_OUT;
> +		}
> +
> +		break;
> +
> +	case 4:
> +		if (xfer[2].len && xfer[2].tx_buf) {
> +			rpc->smenr |= RPC_SMENR_DME;
> +			rpc->dummy = RPC_SMDMCR_DMCYC(xfer[2].len);
> +			writel(rpc->dummy, rpc->regs + RPC_SMDMCR);
> +		}
> +
> +		if (xfer[3].len && xfer[3].rx_buf) {
> +			rpc->smenr |= RPC_SMENR_SPIDE(rpc_bits_xfer
> +				      (xfer[3].len)) | RPC_SMENR_SPIDB(fls
> +				      (xfer[3].rx_nbits >> 1));
> +			rpc->smcr = RPC_SMCR_SPIRE;
> +			rpc->xfer_dir = SPI_MEM_DATA_IN;
> +		}
> +
> +		break;
> +
> +	default:
> +		break;
> +	}
> +}
> +
> +static int rpc_spi_xfer_message(struct rpc_spi *rpc, struct spi_transfer *t)
> +{
> +	int ret;
> +
> +	ret = rpc_spi_set_freq(rpc, t->speed_hz);
> +	if (ret)
> +		return ret;
> +
> +	ret = rpc_spi_io_xfer(rpc,
> +			      rpc->xfer_dir == SPI_MEM_DATA_OUT ?
> +			      t->tx_buf : NULL,
> +			      rpc->xfer_dir == SPI_MEM_DATA_IN ?
> +			      t->rx_buf : NULL);
> +
> +	return ret;
> +}
> +
> +static int rpc_spi_transfer_one_message(struct spi_master *master,
> +					struct spi_message *msg)
> +{
> +	struct rpc_spi *rpc = spi_master_get_devdata(master);
> +	struct spi_transfer *t;
> +	int ret;
> +
> +	rpc_spi_transfer_setup(rpc, msg);
> +
> +	list_for_each_entry(t, &msg->transfers, transfer_list) {
> +		if (list_is_last(&t->transfer_list, &msg->transfers)) {

if (!list...)
 continue;

to reduce the indent level.

> +			ret = rpc_spi_xfer_message(rpc, t);
> +			if (ret)
> +				goto out;
> +		}
> +	}
> +
> +	msg->status = 0;
> +	msg->actual_length = rpc->totalxferlen;
> +out:
> +	spi_finalize_current_message(master);
> +	return 0;
> +}
> +
> +static int __maybe_unused rpc_spi_runtime_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct spi_master *master = platform_get_drvdata(pdev);
> +	struct rpc_spi *rpc = spi_master_get_devdata(master);
> +
> +	clk_disable_unprepare(rpc->clk_rpc);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused rpc_spi_runtime_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct spi_master *master = platform_get_drvdata(pdev);
> +	struct rpc_spi *rpc = spi_master_get_devdata(master);
> +	int ret;
> +
> +	ret = clk_prepare_enable(rpc->clk_rpc);
> +	if (ret)
> +		dev_err(dev, "Can't enable rpc->clk_rpc\n");
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops rpc_spi_dev_pm_ops = {
> +	SET_RUNTIME_PM_OPS(rpc_spi_runtime_suspend,
> +			   rpc_spi_runtime_resume, NULL)
> +};
> +
> +static int rpc_spi_probe(struct platform_device *pdev)
> +{
> +	struct spi_master *master;
> +	struct resource *res;
> +	struct rpc_spi *rpc;
> +	int ret;
> +
> +	master = spi_alloc_master(&pdev->dev, sizeof(struct rpc_spi));
> +	if (!master)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, master);
> +
> +	rpc = spi_master_get_devdata(master);
> +
> +	master->dev.of_node = pdev->dev.of_node;
> +
> +	rpc->clk_rpc = devm_clk_get(&pdev->dev, "clk_rpc");
> +	if (IS_ERR(rpc->clk_rpc))
> +		return PTR_ERR(rpc->clk_rpc);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rpc_regs");
> +	rpc->regs = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(rpc->regs))
> +		return PTR_ERR(rpc->regs);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
> +	rpc->linear.map = devm_ioremap_resource(&pdev->dev, res);
> +	if (!IS_ERR(rpc->linear.map)) {
> +		rpc->linear.dma = res->start;
> +		rpc->linear.size = resource_size(res);
> +	} else {
> +		rpc->linear.map = NULL;
> +	}
> +
> +	pm_runtime_enable(&pdev->dev);
> +	master->auto_runtime_pm = true;
> +
> +	master->num_chipselect = 1;
> +	master->mem_ops = &rpc_spi_mem_ops;
> +	master->transfer_one_message = rpc_spi_transfer_one_message;
> +
> +	master->bits_per_word_mask = SPI_BPW_MASK(8);
> +	master->mode_bits = SPI_CPOL | SPI_CPHA |
> +			SPI_RX_DUAL | SPI_TX_DUAL |
> +			SPI_RX_QUAD | SPI_TX_QUAD;
> +
> +	rpc_spi_hw_init(rpc);
> +
> +	ret = spi_register_master(master);
> +	if (ret) {
> +		dev_err(&pdev->dev, "spi_register_master failed\n");
> +		goto err_put_master;
> +	}
> +	return 0;
> +
> +err_put_master:
> +	spi_master_put(master);
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return ret;
> +}
> +
> +static int rpc_spi_remove(struct platform_device *pdev)
> +{
> +	struct spi_master *master = platform_get_drvdata(pdev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +	spi_unregister_master(master);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id rpc_spi_of_ids[] = {
> +	{ .compatible = "renesas,rpc-r8a77995", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rpc_spi_of_ids);
> +
> +static struct platform_driver rpc_spi_driver = {
> +	.probe = rpc_spi_probe,
> +	.remove = rpc_spi_remove,
> +	.driver = {
> +		.name = "rpc-spi",
> +		.of_match_table = rpc_spi_of_ids,
> +		.pm = &rpc_spi_dev_pm_ops,
> +	},
> +};
> +module_platform_driver(rpc_spi_driver);
> +
> +MODULE_AUTHOR("Mason Yang <masonccyang@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Renesas R-Car D3 RPC SPI controller driver");

This is not D3 specific and not SPI-only controller btw.

> +MODULE_LICENSE("GPL v2");
> 


-- 
Best regards,
Marek Vasut