[PATCH v2 1/4] mfd: stmpe: Move ADC related defines to header of mfd

From: Philippe Schenker
Date: Mon Nov 19 2018 - 05:44:05 EST


Move defines that are ADC related to the header of the overlying mfd,
so they can be used from multiple sub-devices.

Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
---

Changes in v2:
- This is a new added commit. Separate commit for moving the defines out of
drivers/input/touchscreen/stmpe-ts.c to overlying mfd-device drivers/mfd/stmpe.c
- Pre-fix defines with STMPE_

drivers/input/touchscreen/stmpe-ts.c | 34 +++++++++++-----------------
include/linux/mfd/stmpe.h | 11 +++++++++
2 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index 2a78e27b4495..c5d9006588a2 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -49,17 +49,6 @@

#define STMPE_IRQ_TOUCH_DET 0

-#define SAMPLE_TIME(x) ((x & 0xf) << 4)
-#define MOD_12B(x) ((x & 0x1) << 3)
-#define REF_SEL(x) ((x & 0x1) << 1)
-#define ADC_FREQ(x) (x & 0x3)
-#define AVE_CTRL(x) ((x & 0x3) << 6)
-#define DET_DELAY(x) ((x & 0x7) << 3)
-#define SETTLING(x) (x & 0x7)
-#define FRACTION_Z(x) (x & 0x7)
-#define I_DRIVE(x) (x & 0x1)
-#define OP_MODE(x) ((x & 0x7) << 1)
-
#define STMPE_TS_NAME "stmpe-ts"
#define XY_MASK 0xfff

@@ -213,9 +202,10 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
return ret;
}

- adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) |
- REF_SEL(ts->ref_sel);
- adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff);
+ adc_ctrl1 = STMPE_SAMPLE_TIME(ts->sample_time) |
+ STMPE_MOD_12B(ts->mod_12b) | STMPE_REF_SEL(ts->ref_sel);
+ adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
+ STMPE_REF_SEL(0xff);

ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1,
adc_ctrl1_mask, adc_ctrl1);
@@ -225,15 +215,17 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
}

ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2,
- ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq));
+ STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(ts->adc_freq));
if (ret) {
dev_err(dev, "Could not setup ADC\n");
return ret;
}

- tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) |
- SETTLING(ts->settling);
- tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff);
+ tsc_cfg = STMPE_AVE_CTRL(ts->ave_ctrl) |
+ STMPE_DET_DELAY(ts->touch_det_delay) |
+ STMPE_SETTLING(ts->settling);
+ tsc_cfg_mask = STMPE_AVE_CTRL(0xff) | STMPE_DET_DELAY(0xff) |
+ STMPE_SETTLING(0xff);

ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg);
if (ret) {
@@ -242,14 +234,14 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
}

ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z,
- FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z));
+ STMPE_FRACTION_Z(0xff), STMPE_FRACTION_Z(ts->fraction_z));
if (ret) {
dev_err(dev, "Could not config touch\n");
return ret;
}

ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE,
- I_DRIVE(0xff), I_DRIVE(ts->i_drive));
+ STMPE_I_DRIVE(0xff), STMPE_I_DRIVE(ts->i_drive));
if (ret) {
dev_err(dev, "Could not config touch\n");
return ret;
@@ -263,7 +255,7 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
}

ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL,
- OP_MODE(0xff), OP_MODE(OP_MOD_XYZ));
+ STMPE_OP_MODE(0xff), STMPE_OP_MODE(OP_MOD_XYZ));
if (ret) {
dev_err(dev, "Could not set mode\n");
return ret;
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index 4a827af17e59..c0353f6431f9 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -10,6 +10,17 @@

#include <linux/mutex.h>

+#define STMPE_SAMPLE_TIME(x) ((x & 0xf) << 4)
+#define STMPE_MOD_12B(x) ((x & 0x1) << 3)
+#define STMPE_REF_SEL(x) ((x & 0x1) << 1)
+#define STMPE_ADC_FREQ(x) (x & 0x3)
+#define STMPE_AVE_CTRL(x) ((x & 0x3) << 6)
+#define STMPE_DET_DELAY(x) ((x & 0x7) << 3)
+#define STMPE_SETTLING(x) (x & 0x7)
+#define STMPE_FRACTION_Z(x) (x & 0x7)
+#define STMPE_I_DRIVE(x) (x & 0x1)
+#define STMPE_OP_MODE(x) ((x & 0x7) << 1)
+
struct device;
struct regulator;

--
2.19.1