[PATCH] PCI: assign bus numbers present in EA capability for bridges

From: sundeep . lkml
Date: Thu Nov 01 2018 - 05:31:55 EST


From: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>

As per the spec, bridges with EA capability work
with fixed secondary and subordinate bus numbers.
Hence assign bus numbers to bridges from EA if the
capability exists.

Signed-off-by: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
---
drivers/pci/probe.c | 58 ++++++++++++++++++++++++++++++++++++++++---
include/uapi/linux/pci_regs.h | 6 +++++
2 files changed, 60 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b1c05b5..f41d2e6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1030,6 +1030,40 @@ static void pci_enable_crs(struct pci_dev *pdev)

static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
unsigned int available_buses);
+/*
+ * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
+ * numbers from EA capability.
+ * @dev: Bridge with EA
+ * @secondary: updated with secondary bus number in EA
+ * @subordinate: updated with subordinate bus number in EA
+ *
+ * If it is a bridge with EA capability then fixed bus numbers are
+ * read from EA capability list and secondary, subordinate reference
+ * variables will be updated. Otherwise secondary and subordinate reference
+ * variables will be zeroed.
+ */
+static void pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *secondary,
+ u8 *subordinate)
+{
+ int ea;
+ int offset;
+ u32 dw;
+
+ *secondary = *subordinate = 0;
+
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+ return;
+
+ /* find PCI EA capability in list */
+ ea = pci_find_capability(dev, PCI_CAP_ID_EA);
+ if (!ea)
+ return;
+
+ offset = ea + PCI_EA_FIRST_ENT;
+ pci_read_config_dword(dev, offset, &dw);
+ *secondary = dw & PCI_EA_SEC_BUS_MASK;
+ *subordinate = (dw & PCI_EA_SUB_BUS_MASK) >> PCI_EA_SUB_BUS_SHIFT;
+}

/*
* pci_scan_bridge_extend() - Scan buses behind a bridge
@@ -1064,6 +1098,8 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
u16 bctl;
u8 primary, secondary, subordinate;
int broken = 0;
+ u8 fixed_sec, fixed_sub;
+ int next_busnr;

/*
* Make sure the bridge is powered on to be able to access config
@@ -1163,17 +1199,25 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
/* Clear errors */
pci_write_config_word(dev, PCI_STATUS, 0xffff);

+ /* read bus numbers from EA */
+ pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
+
+ next_busnr = max + 1;
+ /* Use secondary bus number in EA */
+ if (fixed_sec)
+ next_busnr = fixed_sec;
+
/*
* Prevent assigning a bus number that already exists.
* This can happen when a bridge is hot-plugged, so in this
* case we only re-scan this bus.
*/
- child = pci_find_bus(pci_domain_nr(bus), max+1);
+ child = pci_find_bus(pci_domain_nr(bus), next_busnr);
if (!child) {
- child = pci_add_new_bus(bus, dev, max+1);
+ child = pci_add_new_bus(bus, dev, next_busnr);
if (!child)
goto out;
- pci_bus_insert_busn_res(child, max+1,
+ pci_bus_insert_busn_res(child, next_busnr,
bus->busn_res.end);
}
max++;
@@ -1234,7 +1278,13 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
max += i;
}

- /* Set subordinate bus number to its real value */
+ /*
+ * Set subordinate bus number to its real value.
+ * If fixed subordinate bus number exists from EA
+ * capability then use it.
+ */
+ if (fixed_sub)
+ max = fixed_sub;
pci_bus_update_busn_res_end(child, max);
pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
}
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index e1e9888..c3d0904 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -372,6 +372,12 @@
#define PCI_EA_FIRST_ENT_BRIDGE 8 /* First EA Entry for Bridges */
#define PCI_EA_ES 0x00000007 /* Entry Size */
#define PCI_EA_BEI 0x000000f0 /* BAR Equivalent Indicator */
+
+/* EA fixed Secondary and Subordinate bus numbers for Bridge */
+#define PCI_EA_SEC_BUS_MASK 0xff
+#define PCI_EA_SUB_BUS_MASK 0xff00
+#define PCI_EA_SUB_BUS_SHIFT 8
+
/* 0-5 map to BARs 0-5 respectively */
#define PCI_EA_BEI_BAR0 0
#define PCI_EA_BEI_BAR5 5
--
1.8.3.1