[PATCH i2c-next v8 2/5] i2c: core: Add support reading of 'bus-timeout-ms' and '#retries' properties

From: Jae Hyun Yoo
Date: Mon Oct 29 2018 - 17:15:08 EST


This commit adds support for 'bus-timeout-ms' and '#retries'
properties to set 'timeout' and 'retries' values in
'struct i2c_adapter' in case an adapter node has the properties.
Still the values can be set by I2C_TIMEOUT and I2C_RETRIES ioctls
on cdev at runtime too.

These properties may not be supported by all drivers. However, if
a driver wants to support one of them, it should adapt the
bindings in the dt-bindings document.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
---
drivers/i2c/i2c-core-base.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index dc78aa7369de..abf8e78bdb82 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1214,6 +1214,7 @@ EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
static int i2c_register_adapter(struct i2c_adapter *adap)
{
int res = -EINVAL;
+ u32 bus_timeout_ms = 0;

/* Can't register until after driver model init */
if (WARN_ON(!is_registered)) {
@@ -1239,8 +1240,15 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
INIT_LIST_HEAD(&adap->userspace_clients);

/* Set default timeout to 1 second if not already set */
- if (adap->timeout == 0)
- adap->timeout = HZ;
+ if (adap->timeout == 0) {
+ device_property_read_u32(&adap->dev, "bus-timeout-ms",
+ &bus_timeout_ms);
+ adap->timeout = bus_timeout_ms ?
+ msecs_to_jiffies(bus_timeout_ms) : HZ;
+ }
+
+ /* Set retries count if it has the property setting */
+ device_property_read_u32(&adap->dev, "#retries", &adap->retries);

/* register soft irqs for Host Notify */
res = i2c_setup_host_notify_irq_domain(adap);
--
2.19.1