Re: [PATCH v3 16/25] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator

From: Jagan Teki
Date: Mon Oct 29 2018 - 10:48:21 EST


On Mon, Oct 29, 2018 at 3:01 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Fri, Oct 26, 2018 at 08:13:35PM +0530, Jagan Teki wrote:
> > Some boards have VCC-DSI pin connected to voltage regulator which may
> > not be turned on by default.
> >
> > Add support for such boards by adding voltage regulator handling code to
> > MIPI DSI driver.
> >
> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > Tested-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > Changes for v3:
> > - new patch
> > Changes for v2:
> > - none
> >
> > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++++++++
> > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 3 +++
> > 2 files changed, 17 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index 42bd7506abaf..bc57343592e0 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -949,6 +949,12 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
> >
> > dsi->drv = drv;
> >
> > + ret = regulator_enable(dsi->regulator);
> > + if (ret) {
> > + dev_err(dev, "Failed to enable regulator\n");
> > + return ret;
> > + }
> > +
>
> The regulator should be enabled only when the device is in use.

True, but there is no device specific quirk needed because who ever
not needed simply use dummy regulator
[ 0.245821] sun6i-mipi-dsi 1ca0000.dsi: 1ca0000.dsi supply vcc-dsi
not found, using dummy regulato
r

even like HVCC in hdmi driver [1]

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c?id=633ba1e086e1abbeef1ffd899911de8cf3987d9f