Re: [PATCH v2 1/2] phy: qcom-qusb2: Use HSTX_TRIM fused value as is

From: Vivek Gautam
Date: Thu Oct 25 2018 - 02:21:17 EST


On 2018-10-25 11:46, Vivek Gautam wrote:
Hi Manu,

On 10/16/2018 12:52 PM, Manu Gautam wrote:

Fix HSTX_TRIM tuning logic which instead of using fused value
as HSTX_TRIM, incorrectly performs bitwise OR operation with
existing default value.

Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on
Qcom chips")
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c
b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index e70e425f26f5..9d6c88064158 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -402,10 +402,10 @@ static void qusb2_phy_set_tune2_param(struct
qusb2_phy *qphy)

/*
* Read efuse register having TUNE2/1 parameter's high nibble.
- * If efuse register shows value as 0x0, or if we fail to find
- * a valid efuse register settings, then use default value
- * as 0xB for high nibble that we have already set while
- * configuring phy.
+ * If efuse register shows value as 0x0 (indicating value is
not
+ * fused), or if we fail to find a valid efuse register
setting,
+ * then use default value for high nibble that we have already
+ * set while configuring the phy.
*/
val = nvmem_cell_read(qphy->cell, NULL);
if (IS_ERR(val) || !val[0]) {
@@ -415,12 +415,13 @@ static void qusb2_phy_set_tune2_param(struct
qusb2_phy *qphy)

/* Fused TUNE1/2 value is the higher nibble only */
if (cfg->update_tune1_with_efuse)
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
- val[0] << 0x4);
+ qusb2_write_mask(qphy->base,
cfg->regs[QUSB2PHY_PORT_TUNE1],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
else
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
- val[0] << 0x4);
-
+ qusb2_write_mask(qphy->base,
cfg->regs[QUSB2PHY_PORT_TUNE2],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
}

static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)

Thanks for the patch.
Acked-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>


My bad. Didn't notice the HTML mode. Resending, so that it reaches to lists as well.

Thanks
Vivek

Regards
Vivek