Re: [PATCH v2] Documentation: dt: Add binding for /secure-chosen/stdout-path

[Rob Herring]

On Mon, Oct 08, 2018 at 06:16:42PM +0800, Jerome Forissier wrote:
> Some platforms may use a single device tree to describe two address
> spaces, as described in d9f43babb998 ("Documentation: dt: Add bindings
> for Secure-only devices"). For these platforms it makes sense to define
> a secure counterpart of /chosen, namely: /secure-chosen. This new node
> is meant to be used by the secure firmware to pass data to the secure
> OS. Only the stdout-path property is supported for now.
> 
> Signed-off-by: Jerome Forissier <jerome.forissier@xxxxxxxxxx>
> ---
> 
> Notes:
>     Sending this again, slightly modified. Previous submission was in March
>     2017 [1]. Since then, OP-TEE has implemented this binding for platforms
>     that use DT [2] (fallback to /chosen/stdout-path to be implemented in
>     [3]). A patch for QEMU has been proposed [4], to which the maintainer
>     responded "Are the DT bindings upstream yet?" ;-)
>     
>     [1] https://patchwork.kernel.org/patch/9602401/
>     [2] https://github.com/OP-TEE/optee_os/commit/4dc31c52544a
>     [3] https://github.com/OP-TEE/optee_os/pull/2569
>     [4] https://patchwork.ozlabs.org/patch/979345/
>     
>     Changes since v1:
>     - Use "should" instead of "may" ("...the Secure OS should use the value
>     of /chosen/stdout-path...").
> 
>  Documentation/devicetree/bindings/arm/secure.txt | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)

Applied.

Rob