Re: [V2, 2/5] Documentation: dt-bindings: Document the Synopsys MIPI DPHY Rx bindings

From: Rob Herring
Date: Fri Oct 12 2018 - 12:45:53 EST


On Thu, Sep 20, 2018 at 01:16:40PM +0200, Luis Oliveira wrote:
> Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
> RX mode.

"dt-bindings: phy: ..." for the subject.

>
> Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx>
> ---
> Changelog
> v2:
> - no changes
>
> .../devicetree/bindings/phy/snps,dphy-rx.txt | 36 ++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
> new file mode 100644
> index 0000000..9079f4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
> @@ -0,0 +1,36 @@
> +Synopsys DesignWare MIPI Rx D-PHY block details
> +
> +Description
> +-----------
> +
> +The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
> +Please refer to phy-bindings.txt for more information.
> +
> +Required properties:
> +- compatible : Shall be "snps,dphy-rx".
> +- #phy-cells : Must be 1.
> +- snps,dphy-frequency : Output frequency of the D-PHY.
> +- snps,dphy-te-len : Size of the communication interface (8 bits->8 or 12bits->12).
> +- reg : Physical base address and size of the device memory mapped
> + registers;
> +
> +Optional properties:
> +- snps,compat-mode : Compatibility mode control

type? values?

> +
> +The per-board settings:
> +- gpios : Synopsys testchip used as reference uses this to change setup
> + configurations.

Preferred to be named (e.g. foo-gpios). How many? What are their
functions?

> +
> +Example:
> +
> + mipi_dphy_rx1: dphy@3040 {
> + compatible = "snps,dphy-rx";
> + #phy-cells = <1>;
> + snps,dphy-frequency = <300000>;
> + snps,dphy-te-len = <12>;
> + snps,compat-mode = <1>;
> + reg = < 0x03040 0x20
> + 0x08000 0x100
> + 0x09000 0x100>;
> + };
> +
> --
> 2.9.3
>