Re: [PATCH] dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus

From: Shawn Guo
Date: Mon Oct 08 2018 - 10:44:18 EST


On Fri, Sep 28, 2018 at 12:26:55AM +0200, Lukasz Majewski wrote:
> Add Device Tree binding document for Liebherr's BK4 external SPI bus.
>
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>

There should really be a patch series consisting of this one and spidev
change [1].

Since spidev has already been picked up, having a series including this
and dts change would be the second option. With DT folks' ACK, I can
send bindings change together with DTS using it.

Shawn

[1] https://lkml.org/lkml/2018/9/28/48

> ---
> Documentation/devicetree/bindings/misc/lwn-bk4.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/lwn-bk4.txt
>
> diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
> new file mode 100644
> index 000000000000..d6a8c188c087
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
> @@ -0,0 +1,26 @@
> +* Liebherr's BK4 controller external SPI
> +
> +A device which handles data acquisition from compatible industrial
> +peripherals.
> +The SPI is used for data and management purposes in both master and
> +slave modes.
> +
> +Required properties:
> +
> +- compatible : Should be "lwn,bk4"
> +
> +Required SPI properties:
> +
> +- reg : Should be address of the device chip select within
> + the controller.
> +
> +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
> + 30MHz at most for the Liebherr's BK4 external bus.
> +
> +Example:
> +
> +spidev0: spi@0 {
> + compatible = "lwn,bk4";
> + spi-max-frequency = <30000000>;
> + reg = <0>;
> +};
> --
> 2.11.0
>