[RFC/RFT PATCH v1 9/9] mtd: spi: Skip reading the Serial Flash Discoverable Parameters

[Lukasz Majewski]

The fsl-quadspi.c driver is not supporting SPINOR_OP_RDSFDP (0x5a)
read opcode - in the legacy driver we do read some garbage
data from AHB mapped area and then return on the first check
(L2376 @ ./mtd/spi-nor/spi-nor.c)

Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
 drivers/mtd/spi-nor/spi-nor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 442102be174e..c79b8c33aeeb 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1103,7 +1103,7 @@ static const struct flash_info spi_nor_ids[] = {
 	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
-	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ | SPI_NOR_SKIP_SFDP) },
 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-- 
2.11.0