Re: [PATCH] iio: magnetometer: Add support for PNI RM3100 9-axis magnetometer

From: Song Qiang
Date: Sat Sep 22 2018 - 05:22:10 EST


On Fri, Sep 21, 2018 at 01:20:12PM +0100, Jonathan Cameron wrote:
> Hi Song,
>
> ...
>
> Please crop emails down to the relevant section when replying. Lots of scrolling
> for everyone otherwise and sometimes things get missed when doing that.
>

Hi Jonathan,

Sorryi for this, won't happen again.
I was intended to give a simple question, but it reminds me of a lot
unrelated stuff, next time I'll make it another email.

> > > > > + if (!buffer)
> > > > > + goto done;
> > > > > +
> > > > > + mutex_lock(&data->lock);
> > > > > + ret = rm3100_wait_measurement(data);
> > > > > + if (ret < 0) {
> > > > > + mutex_unlock(&data->lock);
> > > > > + goto done;
> > > > > + }
> > > > > +
> > > > > + for (i = 0; i < 3; i++) {
> > > > > + ret = regmap_bulk_read(regmap, RM_REG_MX2 + 3 * i,
> > > > > + buffer + 4 * i, 3);
> > > > > + if (ret < 0)
> > > > > + return ret;
> > > > > + }
> > >
> > > Wouldn't it be better to read the 3 axis with one transaction here.
> > > And if required shuffle the data into the iio buffer.
> > >
> > >
> >
> > Hi Phil,
> >
> > That's surely something will make this code better!
> >
> > But also, there is something worth discussing,
> > When triggered buffer is triggered here, I should push all the data into
> > userspace, and every time the buffer is enabled, the iio subsystem
> > automatically computes the alignment of my data. This sensor has 3
> > 24bits channels, and my original thought of data alignment should be
> > like this because my machine is 32bits:
> > +----------+----+----+----+----+----+----+
> > | 3b(ytes) | 1b | 3b | 1b | 3b | 1b | 8b |
> > +----------+----+----+----+----+----+----+
> > 3 bytes data and 1 byte for alignment, last 8 bytes for the timestamp.
> > Aligned to 4 bytes.
> > But the actual layout is like this:
> > +----------+----+----+----+----+----+----+----+
> > | 3b(ytes) | 1b | 3b | 1b | 3b | 1b | 4b | 8b |
> > +----------+----+----+----+----+----+----+----+
> > Soon after I debugged the code of industrial io core I found that in the
> > iio_compute_scanbytes() in industialio-buffer.c, alignment was computed
> > each channel a time, and was aligned with the length of next channel. (eg:
> > In the last case, before the timestamp channel was appended, there are
> > 12 bytes already in the buffer, to align to the timetamp which is 8
> > bytes, it injected 4 bytes to make it 16, and then append timestamp. )
> > This leads to two questions:
> >
> > 1. I thought computer systems align their data in the memory for least
> > time access, shouldn't this always align to the bits of architecture,
> > like for a 32bits machine align to 4?? I'm a little confused here.
> > Jonathan must have considered something, Hoping to get some
> > explanations!
>
> A couple of reasons for this:
>
> 1. It's much nicer to have the same spacing independent of the architecture
> as it saves having to have userspace code do different things depending on
> what the kernel is running at, which may not be the same as userspace.
>
> 2. The size of a memory read is not the only scale that makes sense for
> alignment. In theory at least you can have fun and games like crossing of
> cacheline boundaries if you do 64 bit access only at 32bits aligned on a
> 32 bit platform. Won't hit all that often with typically 64 byte cachelines
> but it is the sort of subtle effect you get when you don't go with
> 'naturally' aligned. (which is what aligning to an elements own size is
> normally called IIRC).
>

I see, architecture independent surely should be the principle of the
Linux kernel, this makes sense, I think I should learn more stuff about
natural alignment. I googled something about it and understand what it
is, but still find it difficult to fully understand its benefits. I think
I'll learn more about it after.

> >
> > 2. In this case I have 4 channels including the timetamp one, and I
> > thought it should be aligned like the first one. But actually it's
> > aligned like the second one, when I was testing the buffer, I got
> > confused, because the in_magn_x_type returned 24/32, 24/32, 24/32
> > and 64/64. If the iio core injected some empty bytes, shouldn't it
> > notify me? Or at least change the timestamp type in scan_bytes to
> > 64/96>>0?? And when I only enabled two of three channels, the data
> > alignment in the buffer looks like this:
> > +----------+----+----+----+----+
> > | 3b(ytes) | 1b | 3b | 1b | 8b |
> > +----------+----+----+----+----+
> > Notice that 4 bytes have gone due to data of two channels have already
> > aligned to 8 bytes.
> > Hoping to get some answers, I'm very curious and interested about this!
>
> Nope it shouldn't do the 64/96 need to tell you because it uses
> the rules of natural alignment which are easy for userspace to predict.
> So in this second case there is no need to pad so it doesn't - whereas the
> 4 bytes are needed in the first case.
>
> We could have explicitly output the offsets and kept things more flexible
> but that would have prevented some general optimizations on the userspace
> side for common cases. If you are reading a 3 axis accelerometer for
> example with timestamp then you can probably safely prebake optimized handling
> for,
>
> 1B (x), 1B (y), 1B(z), 5B(pad), 8B(ts)
>
> 2B (x), 2B (y), 2B(z), 2B(pad), 8B(ts)
>
> in reality no one ever goes higher than this because accelerometers aren't
> accurate enough...
>
> If we did anything more complex we'd need to describe to userspace in some
> sense what was happening beyond the static data currently provided (when
> combined with the ordering and enables) and that makes for a complex ABI
> we don't need.
>
> Also we'd have to do unaligned puts of the u64 timestamp in kernel which
> is nasty.
>
> Jonathan

Yes, you make the point, since natural alignment is a generic rule for a
lot circumstances, surely it would be easy for userspace to predict. I
think libiio should have done these kind stuff, shouldn't be a problem
for userspace!
Thanks for the explanation!

yours,
Song Qiang

> >
> > yours,
> > Song Qiang
> >
> > > > > + mutex_unlock(&data->lock);
> > > > > +
> > > > > + iio_push_to_buffers_with_timestamp(indio_dev, buffer,
> > > > > + iio_get_time_ns(indio_dev));
> > > > > +done:
> > > > > + iio_trigger_notify_done(indio_dev->trig);
> > > > > +
> > > > > + return IRQ_HANDLED;
> > > > > +}
> > > > > +
> > > > > +int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
> > > > > +{
> > > > > + struct iio_dev *indio_dev;
> > > > > + struct rm3100_data *data;
> > > > > + int tmp;
> > > > > + int ret;
> > > > > +
> > > > > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > > > > + if (!indio_dev)
> > > > > + return -ENOMEM;
> > > > > +
> > > > > + data = iio_priv(indio_dev);
> > > > > + dev_set_drvdata(dev, indio_dev);
> > > > > + data->dev = dev;
> > > > > + data->regmap = regmap;
> > > > > +
> > > > > + mutex_init(&data->lock);
> > > > > +
> > > > > + indio_dev->dev.parent = dev;
> > > > > + indio_dev->name = "rm3100";
> > > > > + indio_dev->info = &rm3100_info;
> > > > > + indio_dev->channels = rm3100_channels;
> > > > > + indio_dev->num_channels = ARRAY_SIZE(rm3100_channels);
> > > > > + indio_dev->modes = INDIO_DIRECT_MODE;
> > > > > + indio_dev->available_scan_masks = rm3100_scan_masks;
> > > > > +
> > > > > + if (!irq)
> > > > > + data->use_interrupt = false;
> > > > > + else {
> > > > > + data->use_interrupt = true;
> > > > > + ret = devm_request_irq(dev,
> > > > > + irq,
> > > > > + rm3100_measurement_irq_handler,
> > > > > + IRQF_TRIGGER_RISING,
> > > > > + indio_dev->name,
> > > > > + data);
> > > > > + if (ret < 0) {
> > > > > + dev_err(dev,
> > > > > + "request irq line failed.");
> > > >
> > > > \n
> > > >
> > > > > + return -ret;
> > > > > + }
> > > > > + init_completion(&data->measuring_done);
> > > > > + }
> > > > > +
> > > > > + ret = iio_triggered_buffer_setup(indio_dev, NULL,
> > > > > + rm3100_trigger_handler, NULL);
> > > > > + if (ret < 0)
> > > > > + return ret;
> > > > > +
> > > > > + /* 3sec more wait time. */
> > > > > + ret = regmap_read(data->regmap, RM_REG_TMRC, &tmp);
> > > >
> > > > check ret
> > > >
> > > > > + data->conversion_time = rm3100_samp_rates[tmp-RM_TMRC_OFFSET][2] + 3000;
> > > > > +
> > > > > + /* Starting all channels' conversion. */
> > > > > + ret = regmap_write(regmap, RM_REG_CMM,
> > > > > + RM_CMM_PMX | RM_CMM_PMY | RM_CMM_PMZ | RM_CMM_START);
> > > > > + if (ret < 0)
> > > > > + return ret;
> > > > > +
> > > > > + return devm_iio_device_register(dev, indio_dev);
> > > > > +}
> > > > > +EXPORT_SYMBOL(rm3100_common_probe);
> > > > > +
> > > > > +int rm3100_common_remove(struct device *dev)
> > > > > +{
> > > > > + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> > > > > + struct rm3100_data *data = iio_priv(indio_dev);
> > > > > + struct regmap *regmap = data->regmap;
> > > > > +
> > > > > + regmap_write(regmap, RM_REG_CMM, 0x00);
> > > > > +
> > > > > + return 0;
> > > > > +}
> > > > > +EXPORT_SYMBOL(rm3100_common_remove);
> > > > > +
> > > > > +MODULE_AUTHOR("Song Qiang <songqiang1304521@xxxxxxxxx>");
> > > > > +MODULE_DESCRIPTION("PNI RM3100 9-axis magnetometer i2c driver");
> > > > > +MODULE_LICENSE("GPL v2");
> > > > > diff --git a/drivers/iio/magnetometer/rm3100-i2c.c b/drivers/iio/magnetometer/rm3100-i2c.c
> > > > > new file mode 100644
> > > > > index 000000000000..b50dc5b1b30b
> > > > > --- /dev/null
> > > > > +++ b/drivers/iio/magnetometer/rm3100-i2c.c
> > > > > @@ -0,0 +1,66 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > +/*
> > > > > + * Support for PNI RM3100 9-axis geomagnetic sensor a i2c bus.
> > > > > + *
> > > > > + * Copyright (C) 2018 Song Qiang <songqiang1304521@xxxxxxxxx>
> > > > > + *
> > > > > + * User Manual available at
> > > > > + * <https://www.pnicorp.com/download/rm3100-user-manual/>
> > > > > + *
> > > > > + * i2c slave address 0x20 + SA1 << 1 + SA0.
> > > > > + */
> > > > > +
> > > > > +#include <linux/i2c.h>
> > > > > +
> > > > > +#include "rm3100.h"
> > > > > +
> > > > > +static const struct regmap_config rm3100_regmap_config = {
> > > > > + .reg_bits = 8,
> > > > > + .val_bits = 8,
> > > > > +
> > > > > + .rd_table = &rm3100_readable_table,
> > > > > + .wr_table = &rm3100_writable_table,
> > > > > + .volatile_table = &rm3100_volatile_table,
> > > > > +
> > > > > + .cache_type = REGCACHE_RBTREE,
> > > > > +};
> > > > > +
> > > > > +static int rm3100_probe(struct i2c_client *client)
> > > > > +{
> > > > > + struct regmap *regmap;
> > > > > +
> > > > > + if (!i2c_check_functionality(client->adapter,
> > > > > + I2C_FUNC_SMBUS_READ_I2C_BLOCK | I2C_FUNC_SMBUS_BYTE_DATA))
> > > > > + return -EOPNOTSUPP;
> > > > > +
> > > > > + regmap = devm_regmap_init_i2c(client, &rm3100_regmap_config);
> > > > > + if (IS_ERR(regmap))
> > > > > + return PTR_ERR(regmap);
> > > > > +
> > > > > + return rm3100_common_probe(&client->dev, regmap, client->irq);
> > > > > +}
> > > > > +
> > > > > +static int rm3100_remove(struct i2c_client *client)
> > > > > +{
> > > > > + return rm3100_common_remove(&client->dev);
> > > > > +}
> > > > > +
> > > > > +static const struct of_device_id rm3100_dt_match[] = {
> > > > > + { .compatible = "pni,rm3100-i2c", },
> > > > > + { }
> > > > > +};
> > > > > +MODULE_DEVICE_TABLE(of, rm3100_dt_match);
> > > > > +
> > > > > +static struct i2c_driver rm3100_driver = {
> > > > > + .driver = {
> > > > > + .name = "rm3100-i2c",
> > > > > + .of_match_table = rm3100_dt_match,
> > > > > + },
> > > > > + .probe_new = rm3100_probe,
> > > > > + .remove = rm3100_remove,
> > > > > +};
> > > > > +module_i2c_driver(rm3100_driver);
> > > > > +
> > > > > +MODULE_AUTHOR("Song Qiang <songqiang1304521@xxxxxxxxx>");
> > > > > +MODULE_DESCRIPTION("PNI RM3100 9-axis magnetometer i2c driver");
> > > > > +MODULE_LICENSE("GPL v2");
> > > > > diff --git a/drivers/iio/magnetometer/rm3100-spi.c b/drivers/iio/magnetometer/rm3100-spi.c
> > > > > new file mode 100644
> > > > > index 000000000000..2c7dd9e3a1a2
> > > > > --- /dev/null
> > > > > +++ b/drivers/iio/magnetometer/rm3100-spi.c
> > > > > @@ -0,0 +1,72 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > +/*
> > > > > + * Support for PNI RM3100 9-axis geomagnetic sensor a spi bus.
> > > > > + *
> > > > > + * Copyright (C) 2018 Song Qiang <songqiang1304521@xxxxxxxxx>
> > > > > + *
> > > > > + * User Manual available at
> > > > > + * <https://www.pnicorp.com/download/rm3100-user-manual/>
> > > > > + */
> > > > > +
> > > > > +#include <linux/spi/spi.h>
> > > > > +
> > > > > +#include "rm3100.h"
> > > > > +
> > > > > +static const struct regmap_config rm3100_regmap_config = {
> > > > > + .reg_bits = 8,
> > > > > + .val_bits = 8,
> > > > > +
> > > > > + .rd_table = &rm3100_readable_table,
> > > > > + .wr_table = &rm3100_writable_table,
> > > > > + .volatile_table = &rm3100_volatile_table,
> > > > > +
> > > > > + .read_flag_mask = 0x80,
> > > > > +
> > > > > + .cache_type = REGCACHE_RBTREE,
> > > > > +};
> > > > > +
> > > > > +static int rm3100_probe(struct spi_device *spi)
> > > > > +{
> > > > > + struct regmap *regmap;
> > > > > + int ret;
> > > > > +
> > > > > + /* Actually this device supports both mode 0 and mode 3. */
> > > > > + spi->mode = SPI_MODE_0;
> > > > > + /* data rates cannot exceeds 1Mbits. */
> > > >
> > > > exceed
> > > >
> > > > > + spi->max_speed_hz = 1000000;
> > > > > + spi->bits_per_word = 8;
> > > > > + ret = spi_setup(spi);
> > > > > + if (ret)
> > > > > + return ret;
> > > > > +
> > > > > + regmap = devm_regmap_init_spi(spi, &rm3100_regmap_config);
> > > > > + if (IS_ERR(regmap))
> > > > > + return PTR_ERR(regmap);
> > > > > +
> > > > > + return rm3100_common_probe(&spi->dev, regmap, spi->irq);
> > > > > +}
> > > > > +
> > > > > +static int rm3100_remove(struct spi_device *spi)
> > > > > +{
> > > > > + return rm3100_common_remove(&spi->dev);
> > > > > +}
> > > > > +
> > > > > +static const struct of_device_id rm3100_dt_match[] = {
> > > > > + { .compatible = "pni,rm3100-spi", },
> > > > > + { }
> > > > > +};
> > > > > +MODULE_DEVICE_TABLE(of, rm3100_dt_match);
> > > > > +
> > > > > +static struct spi_driver rm3100_driver = {
> > > > > + .driver = {
> > > > > + .name = "rm3100-spi",
> > > > > + .of_match_table = rm3100_dt_match,
> > > > > + },
> > > > > + .probe = rm3100_probe,
> > > > > + .remove = rm3100_remove,
> > > > > +};
> > > > > +module_spi_driver(rm3100_driver);
> > > > > +
> > > > > +MODULE_AUTHOR("Song Qiang <songqiang1304521@xxxxxxxxx>");
> > > > > +MODULE_DESCRIPTION("PNI RM3100 9-axis magnetometer spi driver");
> > > > > +MODULE_LICENSE("GPL v2");
> > > > > diff --git a/drivers/iio/magnetometer/rm3100.h b/drivers/iio/magnetometer/rm3100.h
> > > > > new file mode 100644
> > > > > index 000000000000..5e30bc0f5149
> > > > > --- /dev/null
> > > > > +++ b/drivers/iio/magnetometer/rm3100.h
> > > > > @@ -0,0 +1,90 @@
> > > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > > +/*
> > > > > + * Header file for PNI RM3100 driver
> > > > > + *
> > > > > + * Copyright (C) 2018 Song Qiang <songqiang1304521@xxxxxxxxx>
> > > > > + */
> > > > > +
> > > > > +#ifndef RM3100_CORE_H
> > > > > +#define RM3100_CORE_H
> > > > > +
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/regmap.h>
> > > > > +
> > > > > +#define RM_REG_REV_ID 0x36
> > > > > +
> > > > > +/* Cycle Count Registers MSBs and LSBs. */
> > > > > +#define RM_REG_CCXM 0x04
> > > > > +#define RM_REG_CCXL 0x05
> > > > > +#define RM_REG_CCYM 0x06
> > > > > +#define RM_REG_CCYL 0x07
> > > > > +#define RM_REG_CCZM 0x08
> > > > > +#define RM_REG_CCZL 0x09
> > > > > +
> > > > > +/* Single Measurement Mode register. */
> > > > > +#define RM_REG_POLL 0x00
> > > > > +#define RM_POLL_PMX BIT(4)
> > > > > +#define RM_POLL_PMY BIT(5)
> > > > > +#define RM_POLL_PMZ BIT(6)
> > > > > +
> > > > > +/* Continues Measurement Mode register. */
> > > > > +#define RM_REG_CMM 0x01
> > > > > +#define RM_CMM_START BIT(0)
> > > > > +#define RM_CMM_DRDM BIT(2)
> > > > > +#define RM_CMM_PMX BIT(4)
> > > > > +#define RM_CMM_PMY BIT(5)
> > > > > +#define RM_CMM_PMZ BIT(6)
> > > > > +
> > > > > +/* TiMe Rate Configuration register. */
> > > > > +#define RM_REG_TMRC 0x0B
> > > > > +#define RM_TMRC_OFFSET 0x92
> > > > > +
> > > > > +/* Result Status register. */
> > > > > +#define RM_REG_STATUS 0x34
> > > > > +#define RM_STATUS_DRDY BIT(7)
> > > > > +
> > > > > +/* Measurement result registers. */
> > > > > +#define RM_REG_MX2 0x24
> > > > > +#define RM_REG_MX1 0x25
> > > > > +#define RM_REG_MX0 0x26
> > > > > +#define RM_REG_MY2 0x27
> > > > > +#define RM_REG_MY1 0x28
> > > > > +#define RM_REG_MY0 0x29
> > > > > +#define RM_REG_MZ2 0x2a
> > > > > +#define RM_REG_MZ1 0x2b
> > > > > +#define RM_REG_MZ0 0x2c
> > > > > +
> > > > > +#define RM_REG_HSHAKE 0x35
> > > > > +
> > > > > +#define RM_W_REG_START RM_REG_POLL
> > > > > +#define RM_W_REG_END RM_REG_REV_ID
> > > > > +#define RM_R_REG_START RM_REG_POLL
> > > > > +#define RM_R_REG_END RM_REG_HSHAKE
> > > > > +#define RM_V_REG_START RM_REG_MX2
> > > > > +#define RM_V_REG_END RM_REG_HSHAKE
> > > > > +
> > > > > +/* Built-In Self Test reigister. */
> > > > > +#define RM_REG_BIST 0x33
> > > > > +
> > > > > +struct rm3100_data {
> > > > > + struct device *dev;
> > > > > + struct regmap *regmap;
> > > > > + struct completion measuring_done;
> > > > > + bool use_interrupt;
> > > > > +
> > > > > + int conversion_time;
> > > > > +
> > > > > + /* To protect consistency of every measurement and sampling
> > > > > + * frequency change operations.
> > > > > + */
> > > > > + struct mutex lock;
> > > > > +};
> > > > > +
> > > > > +extern const struct regmap_access_table rm3100_readable_table;
> > > > > +extern const struct regmap_access_table rm3100_writable_table;
> > > > > +extern const struct regmap_access_table rm3100_volatile_table;
> > > > > +
> > > > > +int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq);
> > > > > +int rm3100_common_remove(struct device *dev);
> > > > > +
> > > > > +#endif /* RM3100_CORE_H */
> > > > >
> > > >
> > >
> > >
> > > --
> > > Regards
> > > Phil Reid
> > >
>
>