[PATCHv4 6/6] mmc: dw_mmc-exynos: Add tuning for sdr and ddr timing for USH-I mode

From: Anand Moon
Date: Sat Sep 22 2018 - 03:57:58 EST


Add tuning for sdr and ddr timing for USH-I mode sdr104/sdr50/ddr50
for host controller.

Cc: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
No changes from previous patch
---
drivers/mmc/host/dw_mmc-exynos.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index ab47b018716a..d46c3439b508 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -253,6 +253,8 @@ static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
if (timing == MMC_TIMING_MMC_HS400) {
dqs |= DATA_STROBE_EN;
strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay);
+ } else if (timing == MMC_TIMING_UHS_SDR104) {
+ dqs &= 0xffffff00;
} else {
dqs &= ~DATA_STROBE_EN;
}
@@ -312,6 +314,15 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
if (ios->bus_width == MMC_BUS_WIDTH_8)
wanted <<= 1;
break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_SDR50:
+ clksel = (priv->sdr_timing & 0xfff8ffff) |
+ (priv->ciu_div << 16);
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ clksel = (priv->ddr_timing & 0xfff8ffff) |
+ (priv->ciu_div << 16);
+ break;
default:
clksel = priv->sdr_timing;
}
--
2.17.1