Re: [PATCH v3 04/12] drm/mediatek: add clock factor for different IC

[CK Hu]

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@xxxxxxxxxxxx>
> 
> different IC has different clock designed in HDMI, the factor for
> calculate clock should be different. Usinng the data in of_node
> to find this factor.
> 

Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>

> Signed-off-by: chunhui dai <chunhui.dai@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
>  1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 1e7369e0d91c..022ccec49cea 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
>  };
>  
>  struct mtk_dpi_conf {
> +	unsigned int (*cal_factor)(int clock);
>  	u32 reg_h_fre_con;
>  	bool edge_sel_en;
>  };
> @@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>  	unsigned int factor;
>  
>  	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
> -
> -	if (mode->clock <= 27000)
> -		factor = 3 << 4;
> -	else if (mode->clock <= 84000)
> -		factor = 3 << 3;
> -	else if (mode->clock <= 167000)
> -		factor = 3 << 2;
> -	else
> -		factor = 3 << 1;
> +	factor = dpi->conf->cal_factor(mode->clock);
>  	drm_display_mode_to_videomode(mode, &vm);
>  	pll_rate = vm.pixelclock * factor;
>  
> @@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static unsigned int mt8173_calculate_factor(int clock)
> +{
> +	if (clock <= 27000)
> +		return 3 << 4;
> +	else if (clock <= 84000)
> +		return 3 << 3;
> +	else if (clock <= 167000)
> +		return 3 << 2;
> +	else
> +		return 3 << 1;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
> +	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>