Re: [PATCH v2 0/7] Introduce STMFX I2C Multi-Function eXpander

From: Alexandre Torgue
Date: Wed Sep 19 2018 - 12:21:28 EST


Hi AmÃlie,

On 09/19/2018 03:27 PM, Amelie Delaunay wrote:
This series adds support for STMicroelectronics Multi-Function eXpander
(STMFX), used on some STM32 discovery and evaluation boards.

STMFX is an STM32L152 slave controller whose firmware embeds the following
features:
- I/O expander (16 GPIOs + 8 extra if the other features are not enabled),
- resistive touchscreen controller,
- IDD measurement.

I2C stuff and chip initialization is based on an MFD parent driver, which
registers a pinctrl MFD child.

---

As soon as bindings will be accepted, I'll have a look on DT patches in order to merge them in stm32-next branch.

regards
Alex

Changes in v2:
- move to MFD parent driver for i2c stuff and chip initialization
- improve regmap configuration
- take advantage of the use of gpio-ranges


Amelie Delaunay (7):
dt-bindings: mfd: Add ST Multi-Function eXpander (STMFX) core bindings
mfd: Add ST Multi-Function eXpander (STMFX) core driver
dt-bindings: pinctrl: document the STMFX pinctrl bindings
pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver
ARM: dts: stm32: add STMFX support on stm32746g-eval
ARM: dts: stm32: add joystick support on stm32746g-eval
ARM: dts: stm32: add orange and blue leds on stm32746g-eval

Documentation/devicetree/bindings/mfd/stmfx.txt | 28 +
.../devicetree/bindings/pinctrl/pinctrl-stmfx.txt | 116 +++
arch/arm/boot/dts/stm32746g-eval.dts | 66 ++
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 2 +-
drivers/mfd/stmfx.c | 626 ++++++++++++++++
drivers/pinctrl/Kconfig | 12 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-stmfx.c | 821 +++++++++++++++++++++
include/linux/mfd/stmfx.h | 27 +
10 files changed, 1712 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
create mode 100644 drivers/mfd/stmfx.c
create mode 100644 drivers/pinctrl/pinctrl-stmfx.c
create mode 100644 include/linux/mfd/stmfx.h