Re: [PATCH v7 1/6] dt-bindings: ti-lmu: Remove LM3697

From: Pavel Machek
Date: Fri Sep 14 2018 - 04:24:03 EST


Hi!

> All be it the analog side of these devices may be the same but the digital side for each chip is different.
> The register maps are not the same, the number of supported LED strings are not
> the same, there are features not supported by this driver and will
> be a pain to add.

Digital side looks similar enough that Milo was able to share code
between them.

Yes, obviously register map will be different.

> Adding features will be a complete night mare especially for the LM3632 which also support Torch and Flash.
>
>
> Here are where a single driver will start getting messy and support difficult
> LM3533 has ALS and an ADC for an ALS analog sensor
> LM3631 has no ALS functionality
> LM3632 has strobe/torch functionality and no ramp support
> LM3633 has lvled support coupled with the hvled support
> LM3695 does not even appear to be available publicly
> LM3697 is the only device that that this driver could be used for as is.

We already been through this once. More than one of these has ramp
support, and more than one has overvoltage protection. (Plus, all of
them are LED drivers).

Surely non-ugly design can be done where the code is shared?

Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature