[PATCH v5 13/18] dmaengine: dma-jz4780: Set DTCn register explicitly

From: Paul Cercueil
Date: Wed Aug 29 2018 - 17:34:06 EST


From: Daniel Silsby <dansilsby@xxxxxxxxx>

Normally, we wouldn't set the channel transfer count register directly
when using descriptor-driven transfers. However, there is no harm in
doing so, and it allows jz4780_dma_desc_residue() to report the correct
residue of an ongoing transfer, no matter when it is called.

Signed-off-by: Daniel Silsby <dansilsby@xxxxxxxxx>
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
---

Notes:
v2: No change

v3: No change

v4: Add my Signed-off-by

v5: No change

drivers/dma/dma-jz4780.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index d055602a92ca..d3b915ec8a09 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -532,6 +532,15 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DRT,
jzchan->transfer_type);

+ /*
+ * Set the transfer count. This is redundant for a descriptor-driven
+ * transfer. However, there can be a delay between the transfer start
+ * time and when DTCn reg contains the new transfer count. Setting
+ * it explicitly ensures residue is computed correctly at all times.
+ */
+ jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DTC,
+ jzchan->desc->desc[jzchan->curr_hwdesc].dtc);
+
/* Write descriptor address and initiate descriptor fetch. */
desc_phys = jzchan->desc->desc_phys +
(jzchan->curr_hwdesc * sizeof(*jzchan->desc->desc));
--
2.11.0