Re: [PATCH v6 4/4] venus: firmware: register separate platform_device for firmware loader

From: Alexandre Courbot
Date: Fri Aug 24 2018 - 03:39:28 EST


On Thu, Aug 23, 2018 at 11:29 PM Vikash Garodia <vgarodia@xxxxxxxxxxxxxx> wrote:
>
> From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
>
> This registers a firmware platform_device and associate it with
> video-firmware DT subnode. Then calls dma configure to initialize
> dma and iommu.
>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
> ---
> .../devicetree/bindings/media/qcom,venus.txt | 13 +++++-
> drivers/media/platform/qcom/venus/core.c | 14 +++++--
> drivers/media/platform/qcom/venus/firmware.c | 49 ++++++++++++++++++++++
> drivers/media/platform/qcom/venus/firmware.h | 2 +
> 4 files changed, 73 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
> index 00d0d1b..7e04586 100644
> --- a/Documentation/devicetree/bindings/media/qcom,venus.txt
> +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
> @@ -53,7 +53,7 @@
>
> * Subnodes
> The Venus video-codec node must contain two subnodes representing
> -video-decoder and video-encoder.
> +video-decoder and video-encoder, and one optional firmware subnode.

Just noticed that the document does not explain in which case the
firmware subnode must be used. Maybe we should have a sentence
explaining that without it we will be using TrustZone to load the
firmware?

>
> Every of video-encoder or video-decoder subnode should have:
>
> @@ -79,6 +79,13 @@ Every of video-encoder or video-decoder subnode should have:
> power domain which is responsible for collapsing
> and restoring power to the subcore.
>
> +The firmware subnode must have:
> +
> +- iommus:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: A list of phandle and IOMMU specifier pairs.
> +
> * An Example
> video-codec@1d00000 {
> compatible = "qcom,msm8916-venus";
> @@ -105,4 +112,8 @@ Every of video-encoder or video-decoder subnode should have:
> clock-names = "core";
> power-domains = <&mmcc VENUS_CORE1_GDSC>;
> };
> +
> + video-firmware {
> + iommus = <&apps_iommu 0x10b2 0x0>;
> + };
> };
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 393994e..3bd3b8a 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -284,6 +284,14 @@ static int venus_probe(struct platform_device *pdev)
> if (ret < 0)
> goto err_runtime_disable;
>
> + ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> + if (ret)
> + goto err_runtime_disable;
> +
> + ret = venus_firmware_init(core);
> + if (ret)
> + goto err_runtime_disable;
> +
> ret = venus_boot(core);
> if (ret)
> goto err_runtime_disable;
> @@ -308,10 +316,6 @@ static int venus_probe(struct platform_device *pdev)
> if (ret)
> goto err_core_deinit;
>
> - ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> - if (ret)
> - goto err_dev_unregister;
> -
> ret = pm_runtime_put_sync(dev);
> if (ret)
> goto err_dev_unregister;
> @@ -347,6 +351,8 @@ static int venus_remove(struct platform_device *pdev)
> venus_shutdown(core);
> of_platform_depopulate(dev);
>
> + venus_firmware_deinit(core);
> +
> pm_runtime_put_sync(dev);
> pm_runtime_disable(dev);
>
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 79b3858..86a26fb 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -20,6 +20,7 @@
> #include <linux/of.h>
> #include <linux/of_address.h>
> #include <linux/platform_device.h>
> +#include <linux/of_device.h>
> #include <linux/qcom_scm.h>
> #include <linux/sizes.h>
> #include <linux/soc/qcom/mdt_loader.h>
> @@ -228,3 +229,51 @@ int venus_shutdown(struct venus_core *core)
>
> return ret;
> }
> +
> +int venus_firmware_init(struct venus_core *core)
> +{
> + struct platform_device_info info;
> + struct platform_device *pdev;
> + struct device_node *np;
> + int ret;
> +
> + np = of_get_child_by_name(core->dev->of_node, "video-firmware");
> + if (!np)
> + return 0;
> +
> + memset(&info, 0, sizeof(info));
> + info.fwnode = &np->fwnode;
> + info.parent = core->dev;
> + info.name = np->name;
> + info.dma_mask = DMA_BIT_MASK(32);
> +
> + pdev = platform_device_register_full(&info);
> + if (IS_ERR(pdev)) {
> + of_node_put(np);
> + return PTR_ERR(pdev);
> + }
> +
> + pdev->dev.of_node = np;
> +
> + ret = of_dma_configure(&pdev->dev, np);
> + if (ret)
> + dev_err(core->dev, "dma configure fail\n");
> +
> + of_node_put(np);
> +
> + if (ret)
> + return ret;
> +
> + core->no_tz = true;
> + core->fw.dev = &pdev->dev;
> +
> + return 0;
> +}
> +
> +void venus_firmware_deinit(struct venus_core *core)
> +{
> + if (!core->fw.dev)
> + return;
> +
> + platform_device_unregister(to_platform_device(core->fw.dev));
> +}
> diff --git a/drivers/media/platform/qcom/venus/firmware.h b/drivers/media/platform/qcom/venus/firmware.h
> index f41b615..119a9a4 100644
> --- a/drivers/media/platform/qcom/venus/firmware.h
> +++ b/drivers/media/platform/qcom/venus/firmware.h
> @@ -16,6 +16,8 @@
>
> struct device;
>
> +int venus_firmware_init(struct venus_core *core);
> +void venus_firmware_deinit(struct venus_core *core);
> int venus_boot(struct venus_core *core);
> int venus_shutdown(struct venus_core *core);
> int venus_set_hw_state(struct venus_core *core, bool suspend);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>