[PATCH v3 0/3] arm64: dts: sdm845: Add RPMh-regulators and usb

From: Douglas Anderson
Date: Wed Aug 22 2018 - 13:36:59 EST


This series adds device tree nodes for the RPMh regulators and USB.
These patches are based on patches in various downstream kernels from
Manu Gautam, David Collins, and Vivek Gautam.

This series was tested on SDM845-MTP (with no-AC firmware) atop
linuxnext (next-20180822) with some extra patches:

>From the mailing list:
- dts: arm64/sdm845: Add node for arm,mmu-500
https://lkml.kernel.org/r/20180814102740.30222-3-vivek.gautam@xxxxxxxxxxxxxx

Changes in v3:
- Don't just fix qfprom unit address, fix the reg too (Stephen).
- Rebased to next-20180822
- Set vin-supply for s4a_1p8 properly (Stephen).
- All regulators now HPM / disallow mode change; see commit text.
- Added a few extra labels for some regulators.
- Updated commit text descriptions.

Changes in v2:
- Use "0x784000" for qfprom rather than "0x780000" as per docs.
- Add calibration for 2nd USB port too
- LDO14 initial mode is LPM and shouldn't be always on (Vivek G)
- LDO25 should have min voltage of 3.3V

Douglas Anderson (2):
arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators
arm64: dts: qcom: sdm845-mtp: Add nodes for USB

Manu Gautam (1):
arm64: dts: qcom: sdm845: Add USB-related nodes

arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 382 ++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 196 ++++++++++++
2 files changed, 578 insertions(+)

--
2.18.0.1017.ga543ac7ca45-goog