Re: [PATCH v6 4/8] interconnect: qcom: Add RPM communication

[Georgi Djakov]

Hi Evan,

On 07/11/2018 01:34 AM, Evan Green wrote:
> On Mon, Jul 9, 2018 at 8:51 AM Georgi Djakov <georgi.djakov@xxxxxxxxxx> wrote:
>>
>> On some Qualcomm SoCs, there is a remote processor, which controls some of
>> the Network-On-Chip interconnect resources. Other CPUs express their needs
>> by communicating with this processor. Add a driver to handle communication
>> with this remote processor.
>>
>> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
>> ---
>>  .../bindings/interconnect/qcom-smd.txt        | 32 +++++++
>>  drivers/interconnect/qcom/Kconfig             | 11 +++
>>  drivers/interconnect/qcom/Makefile            |  2 +
>>  drivers/interconnect/qcom/smd-rpm.c           | 91 +++++++++++++++++++
>>  drivers/interconnect/qcom/smd-rpm.h           | 15 +++
>>  5 files changed, 151 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/interconnect/qcom-smd.txt
>>  create mode 100644 drivers/interconnect/qcom/Kconfig
>>  create mode 100644 drivers/interconnect/qcom/Makefile
>>  create mode 100644 drivers/interconnect/qcom/smd-rpm.c
>>  create mode 100644 drivers/interconnect/qcom/smd-rpm.h
>>
>> diff --git a/Documentation/devicetree/bindings/interconnect/qcom-smd.txt b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
>> new file mode 100644
>> index 000000000000..88a5aeb50935
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
>> @@ -0,0 +1,32 @@
>> +Qualcomm SMD-RPM interconnect driver binding
>> +------------------------------------------------
>> +The RPM (Resource Power Manager) is a dedicated hardware engine
>> +for managing the shared SoC resources in order to keep the lowest
>> +power profile. It communicates with other hardware subsystems via
>> +the shared memory driver (SMD) back-end and accepts requests for
>> +various resources.
>> +
>> +Required properties :
>> +- compatible : shall contain only one of the following:
>> +                       "qcom,interconnect-smd-rpm"
>> +
>> +Example:
>> +       smd {
>> +               compatible = "qcom,smd";
>> +
>> +               rpm {
>> +                       interrupts = <0 168 1>;
>> +                       qcom,ipc = <&apcs 8 0>;
>> +                       qcom,smd-edge = <15>;
>> +
>> +                       rpm_requests {
>> +                               compatible = "qcom,rpm-msm8916";
>> +                               qcom,smd-channels = "rpm_requests";
>> +
>> +                               interconnect-smd-rpm {
>> +                                       compatible = "qcom,interconnect-smd-rpm";
>> +                               };
>> +
>> +                       };
>> +               };
>> +       };
>> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
>> new file mode 100644
>> index 000000000000..b0c2ff928d88
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/Kconfig
>> @@ -0,0 +1,11 @@
>> +config INTERCONNECT_QCOM
>> +       bool "Qualcomm Network-on-Chip interconnect drivers"
>> +       depends on INTERCONNECT
>> +       depends on ARCH_QCOM || COMPILE_TEST
>> +
>> +config INTERCONNECT_QCOM_SMD_RPM
>> +       tristate "Qualcomm SMD RPM interconnect driver"
>> +       depends on INTERCONNECT_QCOM
> 
> Should this also depend on CONFIG_QCOM_SMD_RPM, since it uses
> qcom_rpm_smd_write?

Yes, you are right.

>> +       help
>> +         This is a driver for communicating interconnect related configuration
>> +         details with a remote processor (RPM) on Qualcomm platforms.
> ...
>> diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
>> new file mode 100644
>> index 000000000000..c33b91a3dd51
>> --- /dev/null
>> +++ b/drivers/interconnect/qcom/smd-rpm.h
>> @@ -0,0 +1,15 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2018, Linaro Ltd.
>> + * Author: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
>> + */
>> +
>> +#ifndef __DRIVERS_INTERCONNECT_QCOM_RPM_H
>> +#define __DRIVERS_INTERCONNECT_QCOM_RPM_H
> 
> Nit: this still doesn't quite match, it would need an _SMD like:
> __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
> 

Ok, thanks!

Georgi