[PATCH 2/9] scsi: hisi_sas: tidy channel interrupt handler for v3 hw

From: John Garry
Date: Wed Jul 18 2018 - 10:17:00 EST


From: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>

The ISR of channel interrupt of v3 hw is a little long and messy. This
patch tidies it by relocating CHL_INT1 and CHL_INT2 handling to new
function separately.

Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 156 ++++++++++++++++-----------------
1 file changed, 78 insertions(+), 78 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 4b7688a..d7c3774 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1333,11 +1333,83 @@ static irqreturn_t int_phy_up_down_bcast_v3_hw(int irq_no, void *p)
},
};

-static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
+static void handle_chl_int1_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
{
- struct hisi_hba *hisi_hba = p;
+ u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT1);
+ u32 irq_msk = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT1_MSK);
struct device *dev = hisi_hba->dev;
+ int i;
+
+ irq_value &= ~irq_msk;
+ if (!irq_value)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(port_axi_error); i++) {
+ const struct hisi_sas_hw_error *error = &port_axi_error[i];
+
+ if (!(irq_value & error->irq_msk))
+ continue;
+
+ dev_err(dev, "%s error (phy%d 0x%x) found!\n",
+ error->msg, phy_no, irq_value);
+ queue_work(hisi_hba->wq, &hisi_hba->rst_work);
+ }
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT1, irq_value);
+}
+
+static void handle_chl_int2_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 irq_msk = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2_MSK);
+ u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct pci_dev *pci_dev = hisi_hba->pci_dev;
+ struct device *dev = hisi_hba->dev;
+
+ irq_value &= ~irq_msk;
+ if (!irq_value)
+ return;
+
+ if (irq_value & BIT(CHL_INT2_SL_IDAF_TOUT_CONF_OFF)) {
+ dev_warn(dev, "phy%d identify timeout\n", phy_no);
+ hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
+ }
+
+ if (irq_value & BIT(CHL_INT2_STP_LINK_TIMEOUT_OFF)) {
+ u32 reg_value = hisi_sas_phy_read32(hisi_hba, phy_no,
+ STP_LINK_TIMEOUT_STATE);
+
+ dev_warn(dev, "phy%d stp link timeout (0x%x)\n",
+ phy_no, reg_value);
+ if (reg_value & BIT(4))
+ hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
+ }
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2, irq_value);
+
+ if ((irq_value & BIT(CHL_INT2_RX_INVLD_DW_OFF)) &&
+ (pci_dev->revision == 0x20)) {
+ u32 reg_value;
+ int rc;
+
+ rc = hisi_sas_read32_poll_timeout_atomic(
+ HILINK_ERR_DFX, reg_value,
+ !((reg_value >> 8) & BIT(phy_no)),
+ 1000, 10000);
+ if (rc) {
+ disable_phy_v3_hw(hisi_hba, phy_no);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ BIT(CHL_INT2_RX_INVLD_DW_OFF));
+ hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_INVLD_DW);
+ mdelay(1);
+ enable_phy_v3_hw(hisi_hba, phy_no);
+ }
+ }
+}
+
+static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
u32 irq_msk;
int phy_no = 0;

@@ -1347,84 +1419,12 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
while (irq_msk) {
u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
CHL_INT0);
- u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
- CHL_INT1);
- u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
- CHL_INT2);
- u32 irq_msk1 = hisi_sas_phy_read32(hisi_hba, phy_no,
- CHL_INT1_MSK);
- u32 irq_msk2 = hisi_sas_phy_read32(hisi_hba, phy_no,
- CHL_INT2_MSK);
-
- irq_value1 &= ~irq_msk1;
- irq_value2 &= ~irq_msk2;
-
- if ((irq_msk & (4 << (phy_no * 4))) &&
- irq_value1) {
- int i;
-
- for (i = 0; i < ARRAY_SIZE(port_axi_error); i++) {
- const struct hisi_sas_hw_error *error =
- &port_axi_error[i];
-
- if (!(irq_value1 & error->irq_msk))
- continue;
-
- dev_err(dev, "%s error (phy%d 0x%x) found!\n",
- error->msg, phy_no, irq_value1);
- queue_work(hisi_hba->wq, &hisi_hba->rst_work);
- }
-
- hisi_sas_phy_write32(hisi_hba, phy_no,
- CHL_INT1, irq_value1);
- }

- if (irq_msk & (8 << (phy_no * 4)) && irq_value2) {
- struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
-
- if (irq_value2 & BIT(CHL_INT2_SL_IDAF_TOUT_CONF_OFF)) {
- dev_warn(dev, "phy%d identify timeout\n",
- phy_no);
- hisi_sas_notify_phy_event(phy,
- HISI_PHYE_LINK_RESET);
-
- }
+ if (irq_msk & (4 << (phy_no * 4)))
+ handle_chl_int1_v3_hw(hisi_hba, phy_no);

- if (irq_value2 & BIT(CHL_INT2_STP_LINK_TIMEOUT_OFF)) {
- u32 reg_value = hisi_sas_phy_read32(hisi_hba,
- phy_no, STP_LINK_TIMEOUT_STATE);
-
- dev_warn(dev, "phy%d stp link timeout (0x%x)\n",
- phy_no, reg_value);
- if (reg_value & BIT(4))
- hisi_sas_notify_phy_event(phy,
- HISI_PHYE_LINK_RESET);
- }
-
- hisi_sas_phy_write32(hisi_hba, phy_no,
- CHL_INT2, irq_value2);
-
- if ((irq_value2 & BIT(CHL_INT2_RX_INVLD_DW_OFF)) &&
- (pci_dev->revision == 0x20)) {
- u32 reg_value;
- int rc;
-
- rc = hisi_sas_read32_poll_timeout_atomic(
- HILINK_ERR_DFX, reg_value,
- !((reg_value >> 8) & BIT(phy_no)),
- 1000, 10000);
- if (rc) {
- disable_phy_v3_hw(hisi_hba, phy_no);
- hisi_sas_phy_write32(hisi_hba, phy_no,
- CHL_INT2,
- BIT(CHL_INT2_RX_INVLD_DW_OFF));
- hisi_sas_phy_read32(hisi_hba, phy_no,
- ERR_CNT_INVLD_DW);
- mdelay(1);
- enable_phy_v3_hw(hisi_hba, phy_no);
- }
- }
- }
+ if (irq_msk & (8 << (phy_no * 4)))
+ handle_chl_int2_v3_hw(hisi_hba, phy_no);

if (irq_msk & (2 << (phy_no * 4)) && irq_value0) {
hisi_sas_phy_write32(hisi_hba, phy_no,
--
1.9.1