[PATCH v2] usb: dwc3: of-simple: reset host controller at suspend/resume

From: Enric Balletbo i Serra
Date: Mon Jul 16 2018 - 06:25:58 EST


If we power off the SoC logic rail in S3, we can find that the Type-C
PHY can't initialize correctly after system resume. We need to toggle
the USB3-OTG reset before trying to initialize the PHY, or else it
times out.

phy phy-ff800000.phy.9: phy poweron failed --> -110
dwc3 fe900000.dwc3: failed to initialize core
dwc3: probe of fe900000.dwc3 failed with error -110

Note that the RK3399 TRM suggests that we should keep the whole usb3
controller in reset for the duration of the Type-C PHY initialization.
However, it's hard to assert the reset in the current framework of
reset. We're still skeptical about that, and we haven't yet found a
case where this seems to have mattered. This approach is much easier, it
simply holds the USB3-OTG reset while device is supended.

The dwc3 core is going to reinitialize the controller at suspend/resume
anyway (including a "soft reset"), so it should be safe to do this.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
Dear all,

Now that the usb3-phy otg port support for rk3399 has been merged [1] we
found that suspend/resume is broken. The problem is well known for
ChromeOS kernels, they solved it in a similar way adding a reset pulse on
resume in the specific usb glue layer (dwc3-rockchip). In mainline,
though, we use the dwc3-of-simple glue layer instead of a specific layer
for rockchip. The patch is based on the Brian Norris work but slightly
different, it holds the reset while device is suspended. It was tested
on a Samsung Chromebook Plus with usbc docking station attached by doing
different suspend/resume cycles and checking no usb devices has been
lost.

I am not sure this is the better way to solve this but I did not find
any other way, and, as I am not sure this can be generic, the reset is only
done on rockchip platforms.

Best regards,
Enric

[1] bfdca1736ea76345071bbc5607d18928e54909ac ('arm64: dts: rockchip: add
usb3-phy otg-port support for rk3399')

Changes in v2:
- Use a single of_device_is_compatible() call during probe to set a driver
flag.

drivers/usb/dwc3/dwc3-of-simple.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index dbeff5e6ad14..40bf9e0bbc59 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -28,6 +28,7 @@ struct dwc3_of_simple {
int num_clocks;
struct reset_control *resets;
bool pulse_resets;
+ bool need_reset;
};

static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
@@ -93,6 +94,13 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, simple);
simple->dev = dev;

+ /*
+ * Some controllers need to toggle the usb3-otg reset before trying to
+ * initialize the PHY, otherwise the PHY times out.
+ */
+ if (of_device_is_compatible(np, "rockchip,rk3399-dwc3"))
+ simple->need_reset = true;
+
if (of_device_is_compatible(np, "amlogic,meson-axg-dwc3") ||
of_device_is_compatible(np, "amlogic,meson-gxl-dwc3")) {
shared_resets = true;
@@ -201,9 +209,30 @@ static int dwc3_of_simple_runtime_resume(struct device *dev)

return 0;
}
+
+static int dwc3_of_simple_suspend(struct device *dev)
+{
+ struct dwc3_of_simple *simple = dev_get_drvdata(dev);
+
+ if (simple->need_reset)
+ reset_control_assert(simple->resets);
+
+ return 0;
+}
+
+static int dwc3_of_simple_resume(struct device *dev)
+{
+ struct dwc3_of_simple *simple = dev_get_drvdata(dev);
+
+ if (simple->need_reset)
+ reset_control_deassert(simple->resets);
+
+ return 0;
+}
#endif

static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(dwc3_of_simple_suspend, dwc3_of_simple_resume)
SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend,
dwc3_of_simple_runtime_resume, NULL)
};
--
2.18.0