[PATCH V2] gpio: mxc: add power management support

From: Anson Huang
Date: Mon Jul 16 2018 - 02:11:46 EST


GPIO registers could lose context on i.MX7D,
when enter LPSR mode, the whole SoC will be
powered off except LPSR domain, GPIO banks
will lose context in this case, need to restore
the context after resume from LPSR mode.

This patch adds GPIO save/restore for those necessary
registers, and put the save/restore operations in noirq
suspend/resume phase, since GPIO is fundamental module
which could be used by other peripherals' resume phase.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
changes since V1:
Add condition check to make it only work for i.MX7D which GPIO might lost power.
drivers/gpio/gpio-mxc.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 2f28299..17f2fe2 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -45,6 +45,15 @@ struct mxc_gpio_hwdata {
unsigned fall_edge;
};

+struct mxc_gpio_reg_saved {
+ u32 icr1;
+ u32 icr2;
+ u32 imr;
+ u32 gdir;
+ u32 edge_sel;
+ u32 dr;
+};
+
struct mxc_gpio_port {
struct list_head node;
void __iomem *base;
@@ -55,6 +64,8 @@ struct mxc_gpio_port {
struct gpio_chip gc;
struct device *dev;
u32 both_edges;
+ struct mxc_gpio_reg_saved gpio_saved_reg;
+ bool support_power_off;
};

static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
@@ -434,6 +445,9 @@ static int mxc_gpio_probe(struct platform_device *pdev)
return err;
}

+ if (of_machine_is_compatible("fsl,imx7d"))
+ port->support_power_off = true;
+
/* disable the interrupt and clear the status */
writel(0, port->base + GPIO_IMR);
writel(~0, port->base + GPIO_ISR);
@@ -497,6 +511,8 @@ static int mxc_gpio_probe(struct platform_device *pdev)

list_add_tail(&port->node, &mxc_gpio_ports);

+ platform_set_drvdata(pdev, port);
+
return 0;

out_irqdomain_remove:
@@ -507,11 +523,67 @@ static int mxc_gpio_probe(struct platform_device *pdev)
return err;
}

+static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
+{
+ if (!port->support_power_off)
+ return;
+
+ port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
+ port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
+ port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
+ port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
+ port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
+ port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
+}
+
+static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
+{
+ if (!port->support_power_off)
+ return;
+
+ writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
+ writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
+ writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
+ writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
+ writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
+ writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
+}
+
+static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mxc_gpio_port *port = platform_get_drvdata(pdev);
+
+ mxc_gpio_save_regs(port);
+ clk_disable_unprepare(port->clk);
+
+ return 0;
+}
+
+static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mxc_gpio_port *port = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = clk_prepare_enable(port->clk);
+ if (ret)
+ return ret;
+ mxc_gpio_restore_regs(port);
+
+ return 0;
+}
+
+static const struct dev_pm_ops mxc_gpio_dev_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume)
+};
+
static struct platform_driver mxc_gpio_driver = {
.driver = {
.name = "gpio-mxc",
.of_match_table = mxc_gpio_dt_ids,
.suppress_bind_attrs = true,
+ .pm = &mxc_gpio_dev_pm_ops,
},
.probe = mxc_gpio_probe,
.id_table = mxc_gpio_devtype,
--
2.7.4