RE: [PATCH 1/7 v5] Docs: dt: add fsl-mc iommu-map device-tree binding

From: Nipun Gupta
Date: Fri Jul 06 2018 - 08:11:10 EST




> -----Original Message-----
> From: Robin Murphy [mailto:robin.murphy@xxxxxxx]
> Sent: Tuesday, July 3, 2018 8:10 PM
> To: Nipun Gupta <nipun.gupta@xxxxxxx>; will.deacon@xxxxxxx;
> robh+dt@xxxxxxxxxx; robh@xxxxxxxxxx; mark.rutland@xxxxxxx;
> catalin.marinas@xxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; Laurentiu Tudor
> <laurentiu.tudor@xxxxxxx>; bhelgaas@xxxxxxxxxx
> Cc: hch@xxxxxx; joro@xxxxxxxxxx; m.szyprowski@xxxxxxxxxxx;
> shawnguo@xxxxxxxxxx; frowand.list@xxxxxxxxx; iommu@xxxxxxxxxxxx
> foundation.org; linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx; linux-
> pci@xxxxxxxxxxxxxxx; Bharat Bhushan <bharat.bhushan@xxxxxxx>;
> stuyoder@xxxxxxxxx; Leo Li <leoyang.li@xxxxxxx>
> Subject: Re: [PATCH 1/7 v5] Docs: dt: add fsl-mc iommu-map device-tree
> binding
>
> On 20/05/18 14:49, Nipun Gupta wrote:
> > The existing IOMMU bindings cannot be used to specify the relationship
> > between fsl-mc devices and IOMMUs. This patch adds a generic binding for
> > mapping fsl-mc devices to IOMMUs, using iommu-map property.
> >
> > Signed-off-by: Nipun Gupta <nipun.gupta@xxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/misc/fsl,qoriq-mc.txt | 39
> ++++++++++++++++++++++
> > 1 file changed, 39 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> > index 6611a7c..8cbed4f 100644
> > --- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> > +++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
> > @@ -9,6 +9,25 @@ blocks that can be used to create functional hardware
> objects/devices
> > such as network interfaces, crypto accelerator instances, L2 switches,
> > etc.
> >
> > +For an overview of the DPAA2 architecture and fsl-mc bus see:
> > +drivers/staging/fsl-mc/README.txt
>
> Nit: Looks like that's Documentation/networking/dpaa2/overview.rst now.
>
> > +
> > +As described in the above overview, all DPAA2 objects in a DPRC share the
> > +same hardware "isolation context" and a 10-bit value called an ICID
> > +(isolation context id) is expressed by the hardware to identify
> > +the requester.
> > +
> > +The generic 'iommus' property is insufficient to describe the relationship
> > +between ICIDs and IOMMUs, so an iommu-map property is used to
> define
> > +the set of possible ICIDs under a root DPRC and how they map to
> > +an IOMMU.
> > +
> > +For generic IOMMU bindings, see
> > +Documentation/devicetree/bindings/iommu/iommu.txt.
> > +
> > +For arm-smmu binding, see:
> > +Documentation/devicetree/bindings/iommu/arm,smmu.txt.
> > +
> > Required properties:
> >
> > - compatible
> > @@ -88,14 +107,34 @@ Sub-nodes:
> > Value type: <phandle>
> > Definition: Specifies the phandle to the PHY device node associated
> > with the this dpmac.
> > +Optional properties:
> > +
> > +- iommu-map: Maps an ICID to an IOMMU and associated iommu-
> specifier
> > + data.
> > +
> > + The property is an arbitrary number of tuples of
> > + (icid-base,iommu,iommu-base,length).
> > +
> > + Any ICID i in the interval [icid-base, icid-base + length) is
> > + associated with the listed IOMMU, with the iommu-specifier
> > + (i - icid-base + iommu-base).
> >
> > Example:
> >
> > + smmu: iommu@5000000 {
> > + compatible = "arm,mmu-500";
> > + #iommu-cells = <2>;
>
> This should be 1 if stream-match-mask is present. Bad example is bad :)

Agree :). Ill update it.

>
> Robin.
>
> > + stream-match-mask = <0x7C00>;
> > + ...
> > + };
> > +
> > fsl_mc: fsl-mc@80c000000 {
> > compatible = "fsl,qoriq-mc";
> > reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
> > <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
> > msi-parent = <&its>;
> > + /* define map for ICIDs 23-64 */
> > + iommu-map = <23 &smmu 23 41>;
> > #address-cells = <3>;
> > #size-cells = <1>;
> >
> >