Re: [REGRESSION 4.17] Spurious wakeup / reboot with power button

From: Rafael J. Wysocki
Date: Fri Jul 06 2018 - 05:42:19 EST

Next message: Rohit kumar: "[PATCH v3 0/5] Add support for audio on SDM845 SoC"
Previous message: Peter Zijlstra: "Re: [PATCH V2 16/19] csky: SMP support"
In reply to: Takashi Iwai: "Re: [REGRESSION 4.17] Spurious wakeup / reboot with power button"
Next in thread: Takashi Iwai: "Re: [REGRESSION 4.17] Spurious wakeup / reboot with power button"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Friday, July 6, 2018 8:55:18 AM CEST Takashi Iwai wrote:
> On Fri, 06 Jul 2018 07:18:36 +0200,
> Thomas H4nig wrote:
> >
> >
> >
> > Am 05.07.2018 um 18:56 schrieb Takashi Iwai:
> > > On Thu, 05 Jul 2018 18:02:11 +0200,
> > > Rafael J. Wysocki wrote:
> > >>
> > >> [The Lv's address is not valid any more, so drop it from the CC]
> > >>
> > >> On Thursday, July 5, 2018 5:10:20 PM CEST Rafael J. Wysocki wrote:
> > >>> On Thu, Jul 5, 2018 at 5:09 PM, Takashi Iwai <tiwai@xxxxxxx> wrote:
> > >>>> On Thu, 05 Jul 2018 16:00:14 +0200,
> > >>>> Thomas H4nig wrote:
> > >>>>>
> > >>>>> Am 05.07.2018 um 14:12 schrieb Takashi Iwai:
> > >>>>>> On Thu, 05 Jul 2018 12:41:03 +0200,
> > >>>>>> Rafael J. Wysocki wrote:
> > >>>>>>>
> > >>>>>>> On Thursday, July 5, 2018 11:50:11 AM CEST Takashi Iwai wrote:
> > >>>>>>>> On Thu, 05 Jul 2018 11:34:59 +0200,
> > >>>>>>>> Rafael J. Wysocki wrote:
> > >>>>>>>>>
> > >>>>>>>>> Hi,
> > >>>>>>>>>
> > >>>>>>>>> On Thu, Jul 5, 2018 at 9:05 AM, Takashi Iwai <tiwai@xxxxxxx> wrote:
> > >>>>>>>>>> Hi,
> > >>>>>>>>>>
> > >>>>>>>>>> we've got a regression report since 4.17 about the behavior of
> > >>>>>>>>>> power-off with the power button. When a machine is powered off with
> > >>>>>>>>>> the power button on desktop, it reboots after a few seconds instead of
> > >>>>>>>>>> power down.
> > >>>>>>>>>>
> > >>>>>>>>>> The manual power down via "systemctl poweroff" works fine, so it's
> > >>>>>>>>>> possibly some spurious wakeup by the power button action, and some
> > >>>>>>>>>> ACPI-related change is suspected.
> > >>>>>>>>>> The regression still remains in 4.18-rc3.
> > >>>>>>>>>
> > >>>>>>>>> There are only a few ACPI commits directly related to power management
> > >>>>>>>>> between 4.16 and 4.17 and none of them looks particularly suspicious.
> > >>>>>>>>
> > >>>>>>>> OK, interesting.
> > >>>>>>>>
> > >>>>>>>>> It looks like the power button state may not be cleared sufficiently
> > >>>>>>>>> after it's been pressed which is now visible for some reason.
> > >>>>>>>>
> > >>>>>>>> Hmm, where can such a state remain? Since it happens after the
> > >>>>>>>> machine turned off, some (ACPI) wakeup bits?
> > >>>>>>>
> > >>>>>>> Basically, yes.
> > >>>>>>>
> > >>>>>>> It looks like a GPE may remain active which then triggers wakeup after
> > >>>>>>> shutdown.
> > >>>>>>>
> > >>>>>>> On a hunch, I'm wondering if reverting commit
> > >>>>>>>
> > >>>>>>> 18996f2db918 ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume
> > >>>>>>>
> > >>>>>>> (may not revert clearly, though) makes any difference.
> > >>>>>>
> > >>>>>> OK, I'm building a 4.17.x test kernel with that revert, in OBS
> > >>>>>> home:tiwai:bsc1099930 repo.
> > >>>>>>
> > >>>>>> Thomas, could you try later the kernel in
> > >>>>>> http://download.opensuse.org/repositories/home:/tiwai:/bsc1099930/standard/
> > >>>>>> ? It'll take an hour or so until the build finishes.
> > >>>>>
> > >>>>> With your new built kernel
> > >>>>> 4.17.4-1.g6f23755-default
> > >>>>>
> > >>>>> the power button works again, so the revert solved the problem
> > >>>>
> > >>>> Thanks, that clarifies the cause.
> > >>>> Adding Erik and Lv to Cc.
> > >>>>
> > >>>> I guess it's the side-effect by removing
> > >>>> acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
> > >>>> in acpi_hw_disable_all_gpes().
> > >>>>
> > >>>> This function is called from acpi_power_off_prepare(), and the machine
> > >>>> goes to power off without clearing the GPEs, hence it's woken up later
> > >>>> unexpectedly.
> > >>>
> > >>> That's correct.
> > >>>
> > >>> We need to fix up that commit. I'll try to prepare something.
> > >>>
> > >>
> > >> Below is a patch to test that theory and maybe fix things if it is correct.
> > >>
> > >> What it does is to clear all GPEs after disabling them in
> > >> acpi_power_off_prepare() which should address the issue if our theory
> > >> about the underlying reason is correct.
> > >>
> > >> Please test.
> > >
> > > OK, building a new test kernel package in OBS home:tiwai:bsc1099930-2
> > > repo. It'll appear at
> > > http://download.opensuse.org/repositories/home:/tiwai:/bsc1099930-2/standard/
> > >
> > > Thomas, please give it a try later.
> > >
> > >
> > > thanks,
> > >
> > > Takashi
> >
> > I am sorry, but with your test kernel 4.17.4-1.g76c6238-default the
> > notebook again gets not properly powered off but restarts
>
> Interesting. The package version shows that the tested kernel must be
> the right one. (Though, it'd be good to double-check -- it's often
> confusing if you have multiple same kernel versions on the system.)
>
> If Rafael's patch doesn't work, we'd need to identify which change in
> the commit 18996f2db918 has the effect.

I'd rather prefer the following modification of the previous patch to be
tested:

---
drivers/acpi/acpica/achware.h | 2 ++
drivers/acpi/acpica/evxfgpe.c | 33 ++++++++++++++++++++++++++++++++-
drivers/acpi/acpica/hwgpe.c | 24 +++++++++++++++++++++++-
drivers/acpi/acpica/hwsleep.c | 13 +++++++++----
drivers/acpi/sleep.c | 1 +
include/acpi/acpixf.h | 1 +
6 files changed, 68 insertions(+), 6 deletions(-)

Index: linux-pm/drivers/acpi/acpica/achware.h
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/achware.h
+++ linux-pm/drivers/acpi/acpica/achware.h
@@ -97,6 +97,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_e

acpi_status acpi_hw_disable_all_gpes(void);

+acpi_status acpi_hw_clear_all_gpes(void);
+
acpi_status acpi_hw_enable_all_runtime_gpes(void);

acpi_status acpi_hw_enable_all_wakeup_gpes(void);
Index: linux-pm/drivers/acpi/acpica/hwgpe.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/hwgpe.c
+++ linux-pm/drivers/acpi/acpica/hwgpe.c
@@ -452,7 +452,7 @@ acpi_hw_enable_wakeup_gpe_block(struct a
*
* RETURN: Status
*
- * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
+ * DESCRIPTION: Disable all GPEs in all GPE blocks
*
******************************************************************************/

@@ -466,6 +466,28 @@ acpi_status acpi_hw_disable_all_gpes(voi
return_ACPI_STATUS(status);
}

+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_clear_all_gpes
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Clear all GPEs in all GPE blocks
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_clear_all_gpes(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(hw_clear_all_gpes);
+
+ status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
+ return_ACPI_STATUS(status);
+}
+
/******************************************************************************
*
* FUNCTION: acpi_hw_enable_all_runtime_gpes
Index: linux-pm/drivers/acpi/sleep.c
===================================================================
--- linux-pm.orig/drivers/acpi/sleep.c
+++ linux-pm/drivers/acpi/sleep.c
@@ -1246,6 +1246,7 @@ static void acpi_power_off_prepare(void)
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
acpi_disable_all_gpes();
+ acpi_clear_all_gpes();
acpi_os_wait_events_complete();
}

Index: linux-pm/drivers/acpi/acpica/evxfgpe.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/evxfgpe.c
+++ linux-pm/drivers/acpi/acpica/evxfgpe.c
@@ -710,7 +710,7 @@ ACPI_EXPORT_SYMBOL(acpi_finish_gpe)
*
* RETURN: Status
*
- * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
+ * DESCRIPTION: Disable all GPEs in all GPE blocks
*
******************************************************************************/

@@ -735,6 +735,37 @@ ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes

/******************************************************************************
*
+ * FUNCTION: acpi_clear_all_gpes
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Clear all GPEs in all GPE blocks
+ *
+ ******************************************************************************/
+
+acpi_status acpi_clear_all_gpes(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_clear_all_gpes);
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ status = acpi_hw_clear_all_gpes();
+ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_clear_all_gpes)
+
+/******************************************************************************
+ *
* FUNCTION: acpi_enable_all_runtime_gpes
*
* PARAMETERS: None
Index: linux-pm/include/acpi/acpixf.h
===================================================================
--- linux-pm.orig/include/acpi/acpixf.h
+++ linux-pm/include/acpi/acpixf.h
@@ -755,6 +755,7 @@ ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_sta
*event_status))
ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_dispatch_gpe(acpi_handle gpe_device, u32 gpe_number))
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_disable_all_gpes(void))
+ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_clear_all_gpes(void))
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_runtime_gpes(void))
ACPI_HW_DEPENDENT_RETURN_STATUS(acpi_status acpi_enable_all_wakeup_gpes(void))

Index: linux-pm/drivers/acpi/acpica/hwsleep.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpica/hwsleep.c
+++ linux-pm/drivers/acpi/acpica/hwsleep.c
@@ -51,16 +51,21 @@ acpi_status acpi_hw_legacy_sleep(u8 slee
return_ACPI_STATUS(status);
}

- /*
- * 1) Disable all GPEs
- * 2) Enable all wakeup GPEs
- */
+ /* Disable all GPEs */
status = acpi_hw_disable_all_gpes();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
+ /* If the target sleep state is S5, clear all GPEs too */
+ if (sleep_state == ACPI_STATE_S5) {
+ status = acpi_hw_clear_all_gpes();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
acpi_gbl_system_awake_and_running = FALSE;

+ /* Enable all wakeup GPEs */
status = acpi_hw_enable_all_wakeup_gpes();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);

Next message: Rohit kumar: "[PATCH v3 0/5] Add support for audio on SDM845 SoC"
Previous message: Peter Zijlstra: "Re: [PATCH V2 16/19] csky: SMP support"
In reply to: Takashi Iwai: "Re: [REGRESSION 4.17] Spurious wakeup / reboot with power button"
Next in thread: Takashi Iwai: "Re: [REGRESSION 4.17] Spurious wakeup / reboot with power button"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]