Re: [linux-sunxi] Re: [PATCH v3 09/24] drm/sun4i: Don't skip TCONs if they don't have channel 0

From: Jernej Åkrabec
Date: Thu Jul 05 2018 - 16:05:35 EST


Dne Äetrtek, 05. julij 2018 ob 09:03:58 CEST je Maxime Ripard napisal(a):
> On Sun, Jul 01, 2018 at 11:11:06PM +0800, Chen-Yu Tsai wrote:
> > On Sun, Jul 1, 2018 at 4:27 PM, Jernej Åkrabec <jernej.skrabec@xxxxxxxx>
wrote:
> > > Dne Äetrtek, 28. junij 2018 ob 08:24:34 CEST je Chen-Yu Tsai napisal(a):
> > >> On Thu, Jun 28, 2018 at 12:45 PM, Jernej Åkrabec
> > >>
> > >> <jernej.skrabec@xxxxxxxx> wrote:
> > >> > Dne Äetrtek, 28. junij 2018 ob 03:51:31 CEST je Chen-Yu Tsai
napisal(a):
> > >> >> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec
> > >> >> <jernej.skrabec@xxxxxxxx>
> > >> >
> > >> > wrote:
> > >> >> > TV TCONs (channel 1 only) are always connected to TV or HDMI
> > >> >> > encoder.
> > >> >> > Because of that, all output endpoints on such TCON node will point
> > >> >> > to a
> > >> >> > encoder which is part of component framework.
> > >> >> >
> > >> >> > Correct current graph traversing algorithm in such way that it
> > >> >> > doesn't
> > >> >> > skip output enpoints with id 0 on TV TCONs.
> > >> >>
> > >> >> No. Our bindings say that endpoint 0 _is_ channel 0. For TCONs that
> > >> >> don't
> > >> >> have channel 0, it must be skipped.
> > >> >
> > >> > I'm not sure where this is stated. I read TCON binding again. Can you
> > >> > please point me to it?
> > >>
> > >> https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree
> > >> /bind ings/display/sunxi/sun4i-drm.txt#L169
> > >>
> > >> Our TCON driver still expects RGB or LVDS panel / bridges on endpoint
> > >> 0.
> > >
> > > Yes, but that can only happen on TCON which has channel 0. TV TCONs
> > > (those
> > > with channel 1 only) can't have panels or bridges connected to them,
> > > because they are internally always connected to either HDMI or TV
> > > encoder or both. Actually, R40 is the only SoC, where same TV TCON can
> > > be connected to TV encoder or HDMI. Others have specialized TV TCONs,
> > > which are connect to only one encoder.
> > >
> > > IMO TV TCONs are really just stripped down LCD TCONs to support one (or
> > > max
> > > two) specific encoder.
> >
> > I agree. We've seen these first in the H3, and the reverse, TCONs only
> > with
> > LCD, on the A23/A33.
> >
> > >> So I guess this was sort of implied historically. It's no longer true.
> > >> This is something we should probably fix.
> > >
> > > Fixed in what way? You mean update bindings to mention that TCON output
> > > endpoint 0 is reserved for panels or bridges?
> >
> > Either that, or have the drm driver look at other endpoints. I guess we
> > should ask Maxime if this is already done or not, since the DSI driver
> > isn't endpoint 0 in the A33 dtsi.
>
> The DSI driver isn't really a good example for this, since the panel
> isn't described as part of the OF graph, but DSI binding require that
> it's a child of the DSI controller node.

So should be new behaviour reverted? I mean ignoring endpoint 0 on TV TCONs.

For me, it doesn't make sense to check for panel or bridges on TV TCONs,
because they are never exposed on physical pins. They are always connected to
TVE or HDMI encoder internally.

>
> > >> In practice our drivers don't look at it (yet), but rely on the
> > >> downstream
> > >> encoder type to determine which channel to use.
> > >>
> > >> But please add the "allwinner,tcon-channel" property as specified in
> > >> the binding.
> > >
> > > It's my understanding of TCON binding documentation that property
> > > "allwinner,tcon-channel" is needed only if TCON supports both channels.
> > > TV
> > > TCON clearly supports only channel 1. In that case, there is no doubt to
> > > which channel output endpoint belongs.
> > >
> > > If that's not true, dt bindings documentation should be reworded to
> > > contain
> > > word "needed" or something similar. Currently, no DT for newer SoC
> > > contains
> > > that property (for example, A83T, H3, H5 or even A33).
>
> Yeah, but that's mainly because we have a single output enabled for
> each channel on those newer SoCs. When / if we enable the RGB and LVDS
> output for example, we will have to set this.

So just to be clear, before I send follow up series, I have to add
"allwinner,tcon-channel" property to DT, because both TV TCONs can be
connected to either TVE or HDMI (trough TCON TOP)?

BTW, since this property is not used at all in the code, why not just simply
deprecate it and remove it from existing DTs? I noticed this is standard
practice for obsolete properties.

Best regards,
Jernej

>
> > > On A33 this is even more interesting, since tcon0 has only channel
> > > 0 and has DSI output endpoint with number 1. According to TCON
> > > binding docs, if "allwinner,tcon-channel" is not preset, endpoint
> > > number represent channel. So, that would mean DSI needs channel 1
> > > on tcon which supports clearly only channel 0. So either there
> > > TCON bindings documentation needs updates or DT for A33 has to be
> > > updated.
> >
> > Maxime? You did the A33 DSI stuff.
>
> I guess it's missing on the A33 DSI endpoint.
>
> Maxime