[PATCH v4 1/6] ARM: dts: dra762: Add MCAN clock support

From: Faiz Abbas
Date: Thu Jul 05 2018 - 10:22:04 EST


From: Lokesh Vutla <lokeshvutla@xxxxxx>

MCAN is clocked by H14 divider of DPLL_GMAC. Unlike other
DPLL dividers this DPLL_GMAC H14 divider is controlled by
control module. Adding support for these clocks.

Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
arch/arm/boot/dts/dra76x.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 1c88c581ff18..bfc82636999c 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -17,3 +17,36 @@
&crossbar_mpu {
ti,irqs-skip = <10 67 68 133 139 140>;
};
+
+&scm_conf_clocks {
+ dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clocks = <&dpll_gmac_x2_ck>;
+ ti,max-div = <63>;
+ reg = <0x03fc>;
+ ti,bit-shift=<20>;
+ ti,latch-bit=<26>;
+ assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+ assigned-clock-rates = <80000000>;
+ };
+
+ dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+ reg = <0x3fc>;
+ ti,bit-shift = <29>;
+ ti,latch-bit=<26>;
+ assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+ assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+ };
+
+ mcan_clk: mcan_clk@3fc {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+ ti,bit-shift = <27>;
+ reg = <0x3fc>;
+ };
+};
--
2.17.0