Re: [PATCH v4 6/6] arm64: dts: sdm845: Add tsens nodes

From: Bjorn Andersson
Date: Mon Jul 02 2018 - 14:48:35 EST


On Mon 02 Jul 05:44 PDT 2018, Amit Kucheria wrote:

> SDM845 has two tsens blocks, one with 13 sensors and the other with 8
> sensors.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index cdaabeb..edf8505 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -221,6 +221,22 @@
> #interrupt-cells = <2>;
> };
>
> + tsens0: tsens@c222000 {
> + compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
> + reg = <0xc263000 0x1ff>, /* TM */
> + <0xc222000 0x1ff>; /* SROT */
> + #qcom,sensors = <13>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: tsens@c223000 {
> + compatible = "qcom,tsens-v2.4.0", "qcom,tsens-v2";
> + reg = <0xc265000 0x1ff>, /* TM */
> + <0xc223000 0x1ff>; /* SROT */
> + #qcom,sensors = <8>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> spmi_bus: spmi@c440000 {
> compatible = "qcom,spmi-pmic-arb";
> reg = <0xc440000 0x1100>,
> --
> 2.7.4
>