[PATCH 07/11] cpufreq/schedutil: take into account interrupt

From: Vincent Guittot
Date: Thu Jun 28 2018 - 11:46:37 EST


The time spent under interrupt can be significant but it is not reflected
in the utilization of CPU when deciding to choose an OPP. Now that we have
access to this metric, schedutil can take it into account when selecting
the OPP for a CPU.
rqs utilization don't see the time spend under interrupt context and report
their value in the normal context time window. We need to compensate this when
adding interrupt utilization

The CPU utilization is :
irq util_avg + (1 - irq util_avg / max capacity ) * /Sum rq util_avg

A test with iperf on hikey (octo arm64) gives:
iperf -c server_address -r -t 5

w/o patch w/ patch
Tx 276 Mbits/sec 304 Mbits/sec +10%
Rx 299 Mbits/sec 328 Mbits/sec +09%

8 iterations
stdev is lower than 1%
Only WFI idle state is enable (shallowest diel state)

Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Signed-off-by: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
---
kernel/sched/cpufreq_schedutil.c | 25 +++++++++++++++++++++----
kernel/sched/sched.h | 13 +++++++++++++
2 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index edfbfc1..b77bfef 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -58,6 +58,7 @@ struct sugov_cpu {
unsigned long util_dl;
unsigned long bw_dl;
unsigned long util_rt;
+ unsigned long util_irq;
unsigned long max;

/* The field below is for single-CPU policies only: */
@@ -190,21 +191,30 @@ static void sugov_get_util(struct sugov_cpu *sg_cpu)
sg_cpu->util_dl = cpu_util_dl(rq);
sg_cpu->bw_dl = cpu_bw_dl(rq);
sg_cpu->util_rt = cpu_util_rt(rq);
+ sg_cpu->util_irq = cpu_util_irq(rq);
}

static unsigned long sugov_aggregate_util(struct sugov_cpu *sg_cpu)
{
struct rq *rq = cpu_rq(sg_cpu->cpu);
- unsigned long util;
+ unsigned long util, max = sg_cpu->max;

if (rq->rt.rt_nr_running)
return sg_cpu->max;

+ if (unlikely(sg_cpu->util_irq >= max))
+ return max;
+
+ /* Sum rq utilization */
util = sg_cpu->util_cfs;
util += sg_cpu->util_rt;

- if ((util + sg_cpu->util_dl) >= sg_cpu->max)
- return sg_cpu->max;
+ /*
+ * Interrupt time is not seen by rqs utilization nso we can compare
+ * them with the CPU capacity
+ */
+ if ((util + sg_cpu->util_dl) >= max)
+ return max;

/*
* As there is still idle time on the CPU, we need to compute the
@@ -220,10 +230,17 @@ static unsigned long sugov_aggregate_util(struct sugov_cpu *sg_cpu)
* ready for such an interface. So, we only do the latter for now.
*/

+ /* Weight rqs utilization to normal context window */
+ util *= (max - sg_cpu->util_irq);
+ util /= max;
+
+ /* Add interrupt utilization */
+ util += sg_cpu->util_irq;
+
/* Add DL bandwidth requirement */
util += sg_cpu->bw_dl;

- return min(sg_cpu->max, util);
+ return min(max, util);
}

/**
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 377be2b..9438e68 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -2221,4 +2221,17 @@ static inline unsigned long cpu_util_rt(struct rq *rq)
{
return rq->avg_rt.util_avg;
}
+
+#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+static inline unsigned long cpu_util_irq(struct rq *rq)
+{
+ return rq->avg_irq.util_avg;
+}
+#else
+static inline unsigned long cpu_util_irq(struct rq *rq)
+{
+ return 0;
+}
+
+#endif
#endif
--
2.7.4