[PATCH 1/3] ARM: imx: add L2 page power control for GPC

From: Anson Huang
Date: Wed May 30 2018 - 03:16:24 EST


Some platforms like i.MX6UL/i.MX6SLL have L2
page power control in GPC, it needs to be
disabled if ARM is power gated and L2 is NOT
flushed, add GPC interface to control it.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
arch/arm/mach-imx/common.h | 1 +
arch/arm/mach-imx/gpc.c | 14 ++++++++++++++
2 files changed, 15 insertions(+)

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index c8d68e9..a2716ec 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -58,6 +58,7 @@ struct device *imx_soc_device_init(void);
void imx6_enable_rbc(bool enable);
void imx_gpc_check_dt(void);
void imx_gpc_set_arm_power_in_lpm(bool power_off);
+void imx_gpc_set_l2_mem_power_in_lpm(bool power_off);
void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
void imx25_pm_init(void);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index de535cb..e11159d 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -20,6 +20,7 @@
#include "common.h"
#include "hardware.h"

+#define GPC_CNTR 0x0
#define GPC_IMR1 0x008
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
@@ -27,6 +28,8 @@
#define GPC_PGC_SW2ISO_SHIFT 0x8
#define GPC_PGC_SW_SHIFT 0x0

+#define GPC_CNTR_L2_PGE_SHIFT 22
+
#define IMR_NUM 4
#define GPC_MAX_IRQS (IMR_NUM * 32)

@@ -51,6 +54,17 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off)
writel_relaxed(power_off, gpc_base + GPC_PGC_CPU_PDN);
}

+void imx_gpc_set_l2_mem_power_in_lpm(bool power_off)
+{
+ u32 val;
+
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val &= ~(1 << GPC_CNTR_L2_PGE_SHIFT);
+ if (power_off)
+ val |= 1 << GPC_CNTR_L2_PGE_SHIFT;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+}
+
void imx_gpc_pre_suspend(bool arm_power_off)
{
void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
--
2.7.4